1 minute from Toyonaka Station
Melt fat and tighten skin without surgery.
OsakaInMode Lift
Two types of RF work on under the chin and the jawline at the same time.
Wing clinicToyonaka
Booking & Inquiries 06-6318-8774 Call
[Hours] 10:00-20:00 / Last entry 19:00
Melt and tighten. The synergy of 2 types of RF.
The suction RF “MiniFX” induces cell death in subcutaneous fat cells, and the temperature-controlled RF “Forma” promotes collagen production in the dermis. Wing clinic in Toyonaka, Osaka, improves fat thickness and skin texture at the same time.
— Wing clinic / DoctorContents
Tap to jump to a section
AboutWhat is InMode Lift?
RF medical technology from Israel. A non-invasive contour-improvement treatment in which 2 handpieces dissolve fat and tighten the skin at the same time.
InMode Lift is a non-surgical facial contouring and skin-quality treatment that combines 2 medical RF handpieces developed by InMode of Israel: “MiniFX” and “Forma.” Without a scalpel, it addresses jawline fullness and skin sagging at the same time from two angles: destroying fat cells and producing collagen.
MiniFX is a special handpiece combined with vacuum suction. By lifting the subcutaneous tissue with suction while delivering high-voltage nanosecond pulses (HVP), it heats subcutaneous fat cells and induces cell death. The dissolved fat cells are eliminated from the body through the lymphatic system, so the number of fat cells itself decreases, creating contour changes that are less likely to rebound. It is a special technique among RF treatments that directly addresses double chins, cheek volume, and jawline fullness.
Forma is a gliding handpiece that delivers RF evenly from the skin surface to the deep dermis. A built-in real-time temperature sensor automatically controls skin temperature at 42 to 43°C while continuously promoting collagen and elastin production. It feels like a “warm massage,” so there is almost no pain, and you can put on makeup and go home right after treatment. It works on skin firmness, pores, and fine lines.
The 2 handpieces complement each other: MiniFX reduces “fat thickness,” and Forma refines “skin quality and elasticity.” At Wing clinic, we decide which to use on which area and in what order to match each person’s jawline and goals. We aim for the greatest contour change while keeping downtime to a minimum.
MiniFX + Forma
real-time temperature control
nanosecond RF pulses
medical technology
Handpieces2 RF Handpieces Make Up “InMode Lift”
InMode devices are equipped with 2 types of handpieces for different uses. Each targets a different skin layer, and combining them achieves a combined effect impossible with either alone.
MiniFX handpiece
A special handpiece combining vacuum suction and RF. It heats the subcutaneous fat layer to a depth of 4 to 15 mm, inducing cell death (programmed death) of fat cells. It improves jawline fullness and double chins by “reducing the number of cells.”
Forma handpiece
A gliding handpiece that delivers RF evenly while a real-time temperature sensor automatically keeps the dermis at 42 to 43°C. It promotes collagen and elastin production and improves skin firmness, elasticity, and pores.
MiniFXMiniFX: Destroying Fat Cells with Suction RF
A special handpiece combining vacuum suction and RF. It directly targets the subcutaneous fat layer and reduces the number of fat cells themselves, bringing contour changes that are less likely to rebound.
Vacuum suction draws in the subcutaneous tissue
Vacuum suction inside the handpiece lifts the skin, bringing subcutaneous fat tissue close to the RF energy outlet. Suction improves efficiency, so deep fat layers can be heated with less output.
High-voltage nanosecond pulses (HVP) selectively heat the fat layer
High-voltage nanosecond pulse RF selectively heats the subcutaneous fat layer. The pulse duration is designed to be shorter than the thermal relaxation time of fat cells, so heat damage to the dermis is minimized.
Heated fat cells undergo cell death
Through heating and high-voltage nanosecond pulses, fat cell membranes are destroyed by irreversible electroporation (IRE), and programmed death (cell death) occurs. Unlike necrosis, there is little inflammatory reaction, minimizing the impact on surrounding tissue.
Dead fat cells are eliminated through the lymphatic system
Dead fat cells are engulfed by macrophages and metabolized and eliminated from the body through the lymphatic vessels. Because the “number” of fat cells physically decreases, the contouring effect on the jawline is maintained for a long time.
MiniFX 3D cross-section of action
Selectively heats the subcutaneous fat layer (4 to 15 mm deep), inducing cell death.
Fat cells are metabolized and eliminated through the lymphatic pathway.
FormForma: Inducing Collagen from the Dermis with Temperature-Controlled RF
A gliding handpiece with a real-time temperature sensor. While precisely keeping the dermis at 42 to 43°C, it continuously stimulates fibroblasts, promoting collagen and elastin production.
Forma 3D cross-section of action
The dermis (2 to 4 mm deep) is precisely kept at 42 to 43°C.
Collagen and elastin production appears over 1 to 3 months after treatment.
2mm
Delivers RF evenly while gliding over the skin surface
The handpiece is slid over the skin, delivering RF energy evenly over a wide area rather than concentrating on one point. Spreading the focus eliminates the risk of burns while heating the whole dermis step by step.
A real-time temperature sensor strictly maintains 42 to 43°C
The built-in sensor measures skin temperature 1,000 times per second (about every 1 ms) and automatically adjusts output with feedback control. Below 42°C the effect is insufficient, and above 43°C there is a risk of burns; precisely keeping this 1°C treatment window is Forma’s core technology.
Fibroblasts in the dermis produce collagen and elastin
42 to 43°C triggers a “heat-stress response” in dermal fibroblasts. Collagen and elastin synthesis is enhanced via HSPs (heat shock proteins), appearing as skin elasticity and firmness over 1 to 3 months after treatment.
With continued treatment, the “boost” in collagen production takes hold
Forma’s heat stimulation reactivates collagen-producing ability, which declines with age (peaking in your 20s and falling 1% a year). Continuing monthly maintenance can steadily suppress age-related fibrosis and collagen loss.
ApproachInMode Lift Treatment Approach Based on Korean Standards
InMode Lift combining MiniFX and Forma. With output at the same level as Korean clinics, custom treatment matched to each person’s face shape.
-
STEP 01
Consultation and examination
We check your face, understanding facial asymmetry and fat distribution patterns
-
STEP 02
Area-by-area treatment plan
Suction pressure, RF output, and number of passes set individually for each side and area.
-
STEP 03
MiniFX → Forma treatment
The order of fat-layer heating → dermal heating gives the greatest synergy. Output is adjusted as needed during treatment
Using Korean-standard output settings as they are
With InMode, the output setting determines most of the result. Lowering the output makes pain and side effects easier to control, but it also tends to weaken the effect. At Wing clinic, while also referring to output standards used by clinics in Korea, we treat within the FDA-approved therapeutic range using settings that balance effectiveness and safety. Pain is managed first by adjusting the treatment speed, suction pressure, and pulse interval, and the output is also adjusted when needed.
Custom treatment matched to face shape and fat distribution
MiniFX suction pressure and RF output are adjusted each time according to the fat thickness, skin elasticity, and distance from bone in the treatment area. The optimal settings differ under the chin and below the cheekbones, and for an asymmetrical jawline, the number of passes and output are changed for each side. Individual design based on palpation and visual examination, rather than “the same protocol for everyone,” sets our InMode treatment apart.
MiniFX
Targets the subcutaneous fat layer
Physically reduces the number of fat cells
Changes the jawline contour
Form
Targets the dermis
Promotes collagen production long-term
Refines skin texture and firmness
Korean-standard output × individual design × synergy protocol, for the greatest contour change.
InMode Lift at Wing clinic aims for a result you are satisfied with, using output settings that balance effectiveness and safety and a treatment plan tailored to each face.
EffectsExpected effects
The 2 approaches, physical reduction of fat cells and collagen production in the dermis, address several aesthetic concerns at the same time.
-
01
- Improves under the chin and double chin
-
MiniFX directly heats the fat cells under the chin, inducing cell death. With fewer fat cells, fullness under the chin physically improves. Because fat is “reduced” rather than “shrunk,” results tend to last a long time.
MiniFX
-
02
- A sharper jawline
-
MiniFX addresses volume in the cheeks, below the jaw angle, and around the temples. As fat thickness decreases, the contour becomes sharper, bringing a change that feels like “my face has become smaller.” Many people notice a change from the first session.
MiniFX
-
03
- Promotes firmness and collagen production
-
Forma’s RF stimulates fibroblasts in the dermis, promoting collagen and elastin production. Skin elasticity and firmness improve over 1 to 3 months after treatment. Monthly maintenance can steadily suppress age-related fibrosis.
Form
-
04
- Better skin quality and tighter pores
-
Forma’s even heat stimulation tightens the boundary between the epidermis and dermis, making pores less noticeable. Many people say their skin texture is refined and makeup goes on better. There is almost no pain, and most people actually find treatment pleasant.
Form
-
05
- Contour change with minimal downtime
-
Redness and swelling after MiniFX last 2 to 3 days, and warmth after Forma is gone the same day. You can return to makeup and work from the next day, so it is easy even for active people who cannot take downtime. It achieves changes close to a surgical approach without cutting.
MiniFX + Forma
-
06
- Long-lasting results less likely to rebound
-
The reduction from fat-cell death lasts long-term, because fat cells once lost do not regenerate. Even if you gain weight, the remaining fat cells only enlarge, and the number of cells does not recover. Forma’s lasting collagen effect is easier to maintain with monthly maintenance.
MiniFX + Forma
CourseRecommended course and frequency
Fat-cell death takes time. Rather than stopping at one session, results change greatly by repeating sessions at appropriate intervals. We explain how Wing clinic thinks about course design.
MiniFX course design
Cell death begins, and many people feel fullness under the chin and in the cheeks has lightened 1 to 2 weeks after treatment. However, at this point cell elimination is still in progress.
Dead fat cells are eliminated from the body through the lymphatic system, and the thickness of the fat layer clearly decreases. You notice a sharper jawline.
The stage when further reduction of fat cells and skin tightening from collagen production overlap, and the changes settle.
Fat cells that disappear through cell death do not regenerate, but there is a risk that the remaining fat cells will enlarge with weight gain. Weekly maintenance keeps the condition.
Forma production course design
Fibroblasts in the dermis receive RF heat stimulation, switching on collagen and elastin production. Right after treatment, the skin tends to feel warm and glowing.
The stage when collagen production and cross-linking progress and skin elasticity visibly changes. Many people notice improvement in open pores and fine lines.
Collagen production accumulates, and the skin structure itself improves. Collagen continues to be produced even after 3 months, so results continue.
Collagen naturally decreases with age, so continuing Forma weekly keeps up the pace of production, slowing the speed of skin aging.
Why an interval of “2 to 4 weeks” is optimal
MiniFX cell death progresses gradually after treatment, and elimination of fat cells takes 2 to 4 weeks to complete. If the next treatment is done before this elimination has progressed enough, there is a risk of excessive heat stimulation overlapping in the same area. On the other hand, if the interval is too long, the cumulative treatment effect fades. An interval of 2 to 4 weeks is the best answer for maximizing results while ensuring tissue recovery.
Also, if bruising occurs, the next treatment is done after it has completely faded. This is one of the main reasons the actual treatment interval varies.
CombinationTreatments That Increase Results When Combined
InMode Lift is highly effective on its own, but combining it with other treatments depending on the goal and area makes up for each one’s limits and creates synergy.
Combining with fat-dissolving injections
A two-axis strategy that complements each other’s depth and speed
RF heat induces cell death, and cells are eliminated slowly via the lymphatic system. Results take 1 to 2 months to appear, but because the number of cells “decreases,” they last a long time.
Agents such as Kabelline directly destroy and dissolve fat cell membranes. Results appear quickly, but the range injections can reach is limited to shallow, local areas.
- Complementary speed: combines the fast action of fat-dissolving injections + the long-lasting effect of MiniFX
- Complementary depth: MiniFX’s RF reaches deep fat that injections struggle to reach, while injections handle shallow layers
- Less rebound: two different mechanisms reduce fat cells from multiple angles, minimizing the number of remaining cells
Fat-dissolving injections after bruising from MiniFX has completely faded (guide: 2 to 3 weeks after treatment). Alternatively, the order is designed individually at your consultation.
Those with thicker fat under the chin, who want a faster contour change, or who found MiniFX alone not enough
Combining with a thread lift
A lasting-effect strategy that firms up the lifted foundation with Forma
Absorbable threads such as PDO, PCL, and PLLA are inserted under the skin to physically lift sagging tissue. The threads themselves dissolve in 6 months to 2 years, but collagen is produced around the cogs (barbs).
It heats the whole dermis evenly and activates fibroblasts. New collagen reinforces skin elasticity and thickness, creating a foundation that maintains the state lifted by the thread lift for longer.
- Longer-lasting results: MiniFX reduces fat cells, making the shape easier to maintain even after the threads dissolve
- Improves skin quality and lift at the same time: comprehensive rejuvenation on two axes, with threads refining the “shape” and MiniFX refining the “contour”
- Spread-out downtime: staggering treatment timing lets you manage each downtime separately
Please wait at least 2 to 4 weeks after a thread lift before treatment (to prioritize the threads settling). Treatment begins after the threads have settled, and results are then maintained with weekly maintenance.
Those concerned about both sagging and contour, who found HIFU not effective enough, or who want their thread lift to last longer
Suitability, order, and intervals of combination treatments vary with each person’s condition. The doctor designs them individually at your consultation.
PricePrices
All prices include tax.
FACEFace and jawline (1 session)
COURSECourse prices
*All prices include tax. A doctor nomination fee of 22,000 yen is added separately.
*This is self-pay treatment at a medical institution. *Consultation and examination are free.
FlowThe treatment process
From arrival to treatment and aftercare takes about 70 to 80 minutes. You can put on makeup and go home on the day of treatment.
-
01
- Booking
-
Please book through the web form or by phone. Questions about the treatment and contraindication checks are also accepted by email in advance. For your first visit especially, we recommend allowing plenty of time.
-
02
- Consultation and examination
-
The doctor examines your jawline and palpates subcutaneous fat thickness, designing which handpiece to use on which area and at what output. We listen to your goals and lifestyle.
-
03
- Cleansing and marking of the treatment area
-
Makeup is removed and the skin is cleaned. The treatment area is confirmed and marked. Gel for MiniFX is applied.
-
04
- MiniFX treatment: targeting the subcutaneous fat layer
-
The suction RF handpiece treats fat layers such as under the chin and the cheeks. There is a pulling sensation from suction and a feeling of heat, but most people find it tolerable. Output can be adjusted at any time.
-
05
- Forma treatment: targeting the dermis
-
The temperature-controlled RF handpiece is glided over the skin, heating the dermis of the treatment area and the whole face to 42 to 43°C. It feels like pleasant warmth, like a “hot stone massage,” with almost no pain.
-
06
- Aftercare, post-treatment explanation, and heading home
-
After cooling, we explain the precautions for the day of treatment (avoid long baths and strenuous exercise for 24 hours). You can put on makeup and go home.
RiskRisks, Downtime, and Precautions
InMode Lift is a non-invasive treatment, but please receive it after accurately understanding the side effects specific to each handpiece.
-
Side Effects
- Expected side effects and downtime
-
- MiniFX area: redness and swelling (about 2 to 3 days)
Caused by irritation of the skin from suction. Usually fades in 2 to 3 days. - MiniFX area: bruising (occurs in more than 90% of people; 3 to 10 days)
Suction pressure irritates capillaries under the skin, so bruising appears in most people. It tends to appear in areas easy to suction, such as under the chin and below the cheekbones; the degree varies, but in most cases it can be covered with concealer. It fades naturally in about 10 days, but please adjust the timing of treatment before important events. - Forma area: warmth and flushing (the day to the next day)
A feeling of heat for a few hours after treatment is a normal reaction. It can be eased with an ice pack. - Temporary hypersensitivity or numbness in the treatment area (a few days to 1 week)
- Mild puffiness right after treatment
- MiniFX area: redness and swelling (about 2 to 3 days)
-
Contraindications
- Who cannot receive this treatment
-
- Those who are pregnant or breastfeeding
- Those with metal implants (plates, screws, etc.) in the treatment area
- Those with a pacemaker or implantable defibrillator
- Those with active skin disease, infection, or skin cancer in the treatment area
- Those with serious systemic disease (heart disease, kidney disease, immune disease, etc.)
- Those who have recently had injectable treatment (hyaluronic acid, etc.) in the treatment area (please consult us)
- Those under 16
Disclosure Regarding Self-Pay Treatment and Unapproved Medical Devices
This is a self-pay treatment (not covered by health insurance). Standard costs are as shown in the price table on this page.
- Unapproved status
- The device used in this treatment, “InMode,” has not been approved in Japan under the Pharmaceutical and Medical Devices Act.
- How it is obtained
- It is obtained through personal import under the responsibility of a physician. For notes on personal import, please refer to the website of the Ministry of Health, Labour and Welfare.
- Availability of approved medical devices in Japan
- There are no medical devices approved in Japan with the same performance, structure, etc.
- Safety information from other countries
- It is distributed and used in the country of manufacture and elsewhere, and no reports of serious health damage have been confirmed.
- Relief system for adverse health effects
- As this is an unapproved medical device, it is not covered by the Relief System for Sufferers from Adverse Drug Reactions or the Relief System for Infections Derived from Biological Products.
Timeline after treatment
Treatment complete
Redness and warmth. You can go home with makeup on. Avoid strenuous exercise and long baths
1 to 2
Swelling and bruising
Swelling in the MiniFX area peaks. Can be covered with concealer
3 to 7
Symptoms subside
Redness and swelling fade. Any bruising gradually lightens
later
You notice a change
As fat cells are eliminated, many people begin to feel a change in contour
later
Peak results
The effect of cell death is maximized. Collagen production also progresses
Maintenance and next session
The fat-reduction effect lasts long-term. Monthly maintenance is ideal for Forma
DoctorOur Doctors
DirectorDr. Tsubasa Hayami, Clinic Director
A cosmetic surgeon who provides refined facial contouring based on careful design and medical evidence. Drawing on proven technical skill and evidence-based knowledge, he recommends the best, least burdensome treatment for each patient’s bone structure, expressions, and lifestyle.
— Specialties: facial liposuction / slim-face design / facial contouring / injectables / upper arm and leg liposuction
- Graduated from Kanazawa Medical University
- Department of Ophthalmology, Juntendo University
- Director, Tennoji branch of a major cosmetic surgery clinic
- Wing clinic Toyonaka opens
- Botox Vista / Juvéderm Vista certified doctor
- Alma Tune Lifting certified physician
- Onda Lift Kansai training physician / Oligio Kiss certified physician
- Facial liposuction: 1,000+ cases (Apr 2023 – Oct 2026)
FAQFAQ
Here are questions we often get from patients about InMode Lift.
QWhat kind of treatment is InMode Lift?
A non-invasive treatment combining 2 medical RF handpieces, “MiniFX” and “Forma,” developed by InMode of Israel. MiniFX induces cell death in subcutaneous fat cells with suction RF, and Forma heats the dermis to 42 to 43°C to promote collagen production. Its biggest feature is reducing fat and tightening the skin at the same time without any scalpel. It is an FDA-cleared technology.
QHow are MiniFX and Forma different? Can I have just one of them?
MiniFX is a handpiece that combines vacuum suction and RF to target the subcutaneous fat layer, specialized in improving jawline fullness and double chins. Forma is a gliding handpiece that delivers RF evenly, mainly to promote collagen production in the dermis and improve skin quality. “InMode Lift,” combining both, is the most effective, but Forma alone (for skin-quality improvement or maintenance to prevent sagging) is also available.
QHow painful is treatment? Is anesthesia needed?
With Forma, a real-time temperature sensor keeps 42 to 43°C, so it feels like a “warm massage” with almost no pain. MiniFX involves suction, so there is a pulling sensation and heat in the treatment area, but it can be received without anesthesia. For those sensitive to pain, we lower the output as we go, so please don’t worry. If you would like numbing cream, please ask at your consultation (there may be an additional fee).
QHow long is the downtime? Can I go to work the next day?
Redness and mild swelling in the MiniFX area may last 2 to 3 days. Bruising is rare, but if it occurs, it fades in about 1 week. The Forma area has only warmth and flushing for a few hours to the next day. Makeup is OK from the day of treatment, and you can return to normal work and life from the next day. We recommend avoiding the week before and after important photo shoots or ceremonies.
QHow many sessions until I notice results? How long do they last?
Many people feel a change even after one session. Full contour changes from fat-cell death appear over 1 to 2 months after treatment, and results are expected to peak about 3 months after finishing a course (3 to 5 sessions). The reduction in fat cells lasts semi-permanently, but remaining fat cells may enlarge with weight gain. Forma’s collagen improvement is easier to maintain with monthly maintenance.
QHow does it differ from HIFU or a thread lift? Which suits me?
HIFU is a treatment that “physically lifts sagging” with ultrasound on the SMAS fascia, while InMode is a treatment that “tightens the skin while dissolving subcutaneous fat.” If your main concern is facial fullness or a jawline blurred by fat, InMode suits you; if it is sagging of the SMAS layer (a feeling that your cheeks and contour have dropped), HIFU suits you. Compared with a thread lift, results last a shorter time, but InMode’s strength is short downtime and being easy to repeat. Concerns are often combined, so we suggest the best treatment at your consultation.
QHow can I get InMode Lift in Toyonaka, Osaka? How do I book?
Wing clinic is located in Toyonaka, Osaka, 1 minute on foot from Hankyu Toyonaka Station. We offer InMode Lift (MiniFX and Forma), and the doctor designs treatment to match each person’s jawline and goals. Consultations are free. Please apply by phone or through our online booking form. The location is easy to reach from central Osaka, Kobe, and Kyoto.
Contact us Booking & Inquiries
You can also book or ask questions via LINE!
Access
View on a larger map4F Toyonaka Ekimae Yasuda Building, 1-2-35 Honmachi, Toyonaka, Osaka
- 1 minute walk from Hankyu Toyonaka Station / 11 minutes by train from Umeda Station
- 15 minutes from Itami Airport / 15 minutes from Shin-Osaka Station
Hours
10:00–20:00 (last entry 19:00)
Closed: irregular *For more information, please contact us.
Departments: Cosmetic Dermatology, Cosmetic Surgery, Internal Medicine, Dermatology