1 minute from Toyonaka Station
Heat delivered deep from the needle tips tightens from within.
OsakaMorpheus8 Burst
Morpheus8 Burst, RF microneedling by InMode. One insertion delivers radiofrequency to several depths at once, reaching multiple layers up to 5 mm under the skin (with heat reaching about +1 mm). Combining physical stimulation by the needles with thermal coagulation by RF, it promotes the rebuilding of collagen and elastin from within. It rebuilds sagging, open pores, acne scars, and skin quality from deep down without resurfacing the surface. Difficult areas with thin skin, such as around the eyes, are treated directly by a doctor.
Wing clinicToyonaka
Booking & Inquiries 06-6318-8774 Call
[Hours] 10:00-20:00 / Last entry 19:00
Contents
Tap to jump to a section
AboutWhat is Morpheus8 Burst?
Morpheus8 Burst, offered by Wing clinic in Toyonaka, Osaka, is fractional RF microneedling that delivers radiofrequency (RF) deep into tiny holes made by needles, rebuilding the skin from within. Its new generation is “Burst,” which acts on several depths at once. Start with how it works and how it differs from other treatments.
Morpheus8 Burst is a fractional RF (radiofrequency) microneedling device by InMode of Israel. Ultra-fine needles are inserted into the skin and bipolar radiofrequency is emitted from the needle tips. The heat promotes collagen and elastin production, rebuilding sagging, pores, acne scars, and skin quality from “the skin’s foundation.”
For deep layers that conventional microneedling and surface lasers struggled to reach, Morpheus8 Burst has one of the deepest reaches among fractional RF devices: up to 5 mm under the skin (plus about 1 mm of heat action). Going 1 mm deeper than the 4 mm of the conventional Morpheus8 means it now reliably reaches the subcutaneous fat layer. Because heat can be concentrated from the dermis to below the skin without widely resurfacing the epidermis, its feature is that it works on deep layers while keeping downtime low.
The biggest evolution of “Burst” is delivering heat to several depths in succession with one needle insertion. Previously, “one insertion = one depth,” but Burst covers shallow to deep layers in one approach. As a result, one session acts more evenly on multiple layers and also shortens treatment time.
However, the optimal needle depth and output (energy) change with skin type, area, and concern. In particular, difficult areas with thin, delicate skin, such as around the eyes, are treated directly by a doctor at our clinic.
The concerns Morpheus8 Burst addresses are wide-ranging, sagging, sagging pores, acne scars, and skin quality, and they are concerns at different “depths.” Burst’s multilayer approach can care for everything from shallow pores to deep sagging in one session, so its feature is that the more combined your concerns, the better it suits you. Without combining several devices, one device works on the skin’s foundation from multiple angles.
Also, because it is designed to concentrate heat from the dermis to below the skin without widely resurfacing the surface, a major practical advantage is that downtime is easier to keep low than with laser resurfacing. It suits those who want to build up their skin from within little by little without pausing work or daily life. At our clinic, we carefully examine your skin at the first consultation and suggest the best treatment plan, including the number of sessions, intervals, and priority of areas.
needle depth
beyond the needle tip
per insertion
applicator in use
MechanismHow RF microneedling works
Not only “physically stimulating with needles” like a Dermapen, Morpheus8 also “adds heat with radiofrequency (RF) from the needle tips.” Because it is fractional RF combining these 2 actions, rebuilding of collagen and elastin in the deep dermis is accelerated.
RF = radiofrequency at the needle tips heats and contracts the “deep dermis”
When bipolar radiofrequency (RF) flows from the needle tips, the dermis to below the skin is heated at the depth the needles reach. The heat makes collagen fibers contract (tighten) on the spot, while promoting new collagen production. Through the synergy of “physical stimulation + thermal coagulation,” it works more deeply on sagging and unevenness than needles alone or RF alone. Since the surface has only needle holes, downtime is easier to keep low than with lasers that burn a whole area.
The bipolar method passes current between 2 needle points, so energy concentrates at the target depth and damage to the epidermis is minimized. The “Burst” function also makes it possible to deliver heat continuously to several depths, from shallow to deep layers, with one insertion. This allows a multilayer approach in one session to concerns with different causes, such as sagging pores, jawline fullness, and acne scars. The SCALE function automatically adjusts the temperature range for each layer, optimizing the balance of safety and effectiveness.
Dedicated handpieces and applicators
Morpheus8 Burst uses dedicated handpieces that support SCALE (automatic temperature adjustment for each layer) and BURST (pulsed delivery to several depths in one shot). The applicator currently used at our clinic is a 24-pin applicator, which can set 2 depths at the same time per insertion. The needles reach up to 5 mm, and the heat spreads about 1 mm deeper from there.
2 depths can be set at the same time per insertion.
Forehead and temples / around the eyes / cheeks / neck. For pores, skin quality, and firmness.
For the jawline / jowls / double chin / lower cheeks / under the chin.
Heat reaches about 1 mm deeper than the needle depth.
BurstBurst Technology: Several Depths at Once with One Insertion
“Burst” is the biggest evolution of Morpheus8 Burst. Previously, each needle insertion could deliver heat to only one depth. With Burst, heat is applied as the needles are inserted deep and then withdrawn, emitting radiofrequency continuously to several depths with one insertion. For example, a deep 5 mm layer and a shallow 2 mm layer can be covered in one approach (the 24-pin applicator used at our clinic can set 2 depths at the same time).
Conventional Morpheus8
Heat is delivered to one target depth. To target several layers, insertions must be repeated at different depths, which also takes time.
Morpheus8 Burst
One insertion delivers heat continuously from shallow to deep layers. Because multiple layers are covered at once, evenness is high and treatment time is also shortened.
Covers multiple layers at once
From shallow pores and texture to deep sagging and layers near fat. It works on concerns at different depths together in one approach.
Less downtime
The surface has only tiny needle holes and is not widely resurfaced like lasers that burn a whole area. Because several depths are treated together, the number of insertions is also reduced, making downtime such as redness and swelling easier to keep light.
Less burden on patients
There is less need to reinsert many times at different depths, so the same area can be treated in a shorter time. Shorter treatment time eases pain, physical burden, and time spent on the bed, making it an easy treatment even for first-timers.
BenefitsExpected Effects of Morpheus8 Burst
Sagging and lifting, sagging and open pores, acne scars (craters), and skin quality and texture. A multilayer approach up to 5 mm under the skin works on skin concerns at different depths together. Please also see treatment areas and recommended sessions.
Sagging and tightening (lift)
It heats and coagulates deep layers from the dermis to below the skin, contracting and renewing collagen, and tightens fullness in the cheeks and jawline from the foundation.
Sagging pores and open pores
By restoring firmness to the dermis around pores, it tightens vertically stretched “sagging pores” and open pores, making them less noticeable.
Acne scars and craters
It rebuilds the dermis of indented scar tissue. Rather than resurfacing the surface, it works to fill the foundation of the unevenness from within.
Skin quality, texture, and smoothness
Regeneration of collagen and elastin refines firmness, tone, and texture, lifting your skin to a smoother feel.
Eye area and fine lines (doctor treatment)
The thin, delicate eye area is treated by a doctor who adjusts depth and output. It addresses firmness under the eyes and fine lines.
Neck and under-chin lines and fullness
The neck has little fat, so it is treated at a shallower depth of 2 to 3 mm, addressing both deeply etched lines and lines from sagging. It also suits those who want to define the boundary with the area under the chin.
AreasTreatment Areas and Guide to Recommended Sessions
We design the tip, treatment depth, and output for each area and concern, such as the cheeks and jawline, eye area, neck, and acne-scar areas. Changes build up slowly with collagen regeneration, so we recommend continuing for 3 to 5 sessions at intervals of about 1.5 months. Please also check prices and how long results last.
| Area | Main concerns | Recommended sessions | Guide interval |
|---|---|---|---|
| Cheeks and jawlinePopular | Sagging, sagging pores, skin quality | 3–5 sessions | About 1.5 months |
| Eye area (doctor treatment) | Firmness under the eyes and fine lines | 3–5 sessions | About 1.5 months |
| Neck | Horizontal lines and fullness | 3–5 sessions | About 1.5 months |
| Acne-scar areas (cheeks, etc.) | Craters, unevenness, and pores | 3–5 sessions | About 1.5 months |
CheckWho It Suits and Who It Does Not
Morpheus8 Burst (RF microneedling) is not a cure-all. We tell you honestly about the concerns it handles well, such as sagging, sagging pores, and acne scars, and the cases it does not suit or who cannot receive it.
Who it suits
- Bothered by sagging or fullness in the cheeks and jawline
- Want to tighten sagging or open pores
- Want to improve uneven acne scars or craters
- Want to lift skin texture, firmness, and overall quality
- Want to change the skin from deep down without surgery and with less downtime
- Want to leave difficult areas such as the eyes and neck to a doctor
Who it does not suit / who cannot receive it
- Those seeking an instant change completed in one session (changes appear over 1 to 3 months)
- Those with an important event coming up who cannot take any downtime
- Those who are pregnant or breastfeeding
- Those with a pacemaker or metal / electronic devices in the body
- Those with serious skin disease, inflammation, or infection in the treatment area
- Those prone to keloids or right after a strong tan (timing needs to be adjusted)
ComparisonHow It Differs from Other Microneedle RF
Even with the same “needles + radiofrequency,” the role changes with the direction the radiofrequency flows and how deep it reaches. Devices such as Potenza mainly excel at rejuvenation of the skin surface (skin treatment), while Morpheus8 Burst excels at deep volume reduction + surface tightening.
| Morpheus8 Burst | Potenza and other microneedle RF devices | |
|---|---|---|
| Direction of radiofrequency flow | Vertically from the needle tips | Needles move sideways, around the needles |
| How heat spreads | Applied three-dimensionally over a wide area | Applied in a limited way around the needles |
| Maximum needle depth | Up to 5 mm (conventional Morpheus8: 4 mm) | Basically up to about 2.5 to 3 mm |
| Main target layers | Epidermis, dermis, and subcutaneous fat layer (all layers) | Dermis |
| Best for | Deep volume reduction + tightening (slimmer face, lift) | Surface skin treatment for pores, skin quality, etc. |
| Distinctive features | Burst (2 depths at once with one insertion) | Drug delivery (product infusion) possible |
Position at our clinic
Morpheus8 Burst is a step more thorough than Oligio Kiss. However, there is still a big gap from Quantum, so think of it as a treatment positioned between Oligio Kiss and Quantum. We suggest the best device for your concerns and the downtime you can take.
RF x HIFUHow RF (Morpheus8) and HIFU Differ
Even among “non-surgical sagging treatments,” the layer they work on and the principle that creates heat are completely different. Neither is better; their roles differ. Knowing this difference makes choosing a treatment clearer.
Morpheus8 Burst (RF)
Rebuilds “the skin itself” with needles + radiofrequency
- Layers it works on: epidermis to dermis to below the skin (mainly shallow to mid layers)
- Principle: ultra-fine needles reach the target depth directly, and radiofrequency (heat) at the needle tips rebuilds collagen and elastin in the dermis
- Strengths: raising “the quality of the skin itself,” such as firmness, texture, sagging pores, and acne scars
- Image: re-weaving the “fabric” of the skin from within to make it thicker and smoother
HIFU
Lifts “the deep foundation” with ultrasound
- Layers it works on: “deeper foundations” such as the SMAS fascia and fat layer
- Principle: ultrasound is focused on a single point, creating pinpoint thermal coagulation points deep down without damaging the skin surface, for immediate contraction + tightening
- Strengths: lifting the jawline and fullness
- Image: pulling up the whole “foundation (framework and suspension)” that supports the fabric
That’s Why Sagging Is Best Approached with “Combinations”
Sagging occurs from several overlapping causes: loosening of the skin itself and drooping of the deep foundation that supports it. Morpheus8 Burst (RF) handles the former, “skin quality and firmness,” and HIFU the latter, “deep lifting.” Because they work on different layers, they do not compete, and dividing the roles creates synergy. At our clinic, we identify which layer is the main cause of your concern and suggest the best combination.
AnesthesiaPain and anesthesia
We are often asked, “Does Morpheus8 Burst hurt?” It is a treatment with fairly strong pain. We honestly explain what the pain is and our approach to topical numbing cream + nitrous oxide sedation and output adjustment.
Pain from the “heat” of needles + radiofrequency.
We keep it well under control with 2 types of anesthesia
Because Morpheus8 Burst passes radiofrequency from the needle tips while inserting ultra-fine needles, the pain is fairly strong (stronger than Potenza). Our standard is to apply topical numbing cream for about 30 minutes before treatment and combine it with nitrous oxide sedation during treatment.
The pain centers less on “the moment of insertion” than on the moment heat is released and the tingling heat afterward. In particular, areas close to bone (forehead, temples, lower edge of the jawline) tend to be more sensitive. How pain is felt varies from person to person, so output is adjusted while checking your pain. Please do not endure it; feel free to speak up (if you move because you cannot bear the pain, we may stop treatment for safety).
Stinging and warmth remain after treatment, but we cool and soothe the skin thoroughly before you go home. Our treatment also includes LDM (ultrasound treatment) for soothing, easing redness and warmth after treatment and supporting skin recovery.
Treatment summary
- Pain
- Fairly strong (stronger than Potenza)
- Anesthesia
- Numbing cream + nitrous oxide sedation
- Bathing
- Shower only on the day
- Face washing and toner
- from 12 hours after
- Makeup
- from 24 hours after
- Downtime
- About 1 week
- Recommended sessions
- 3 to 5 sessions, once every 1.5 months
*Roughness may remain on the neck for about 2 weeks. Actual sensation varies with anesthesia and output adjustment.
FlowThe treatment process
From booking and consultation to treatment and aftercare, first-timers can feel at ease.
- 01Approx. 60 min
- Booking and consultation
Book online or by phone. We listen to your concerns and wishes and introduce a treatment plan.
- 02Approx. 20 min
- Doctor’s examination and treatment design
The doctor checks your skin and medical history and decides the tip, treatment depth, and output. Difficult areas such as around the eyes are treated by a doctor.
- 03Approx. 30 min
- Cleansing and topical anesthesia
After removing makeup, numbing cream is applied to the treatment area. We wait until it takes full effect, and nitrous oxide sedation is also used during treatment to reduce pain.
- 04Approx. 40 min
- Treatment (Burst)
Following the design, needles + radiofrequency are delivered to multiple layers. The Burst function changes depth as it goes, progressing efficiently.
- 05Approx. 15 min
- LDM soothing and aftercare
After treatment, the skin is cooled thoroughly, moisturized, and soothed. We explain how to spend the day and points to note for skincare.
- 06Approx. 10 min
- Powder room and heading home
After treatment, you can touch up your makeup and get ready in the powder room. We explain how to spend the day and aftercare before you head home.
DowntimeDowntime timeline
We explain in time order how your skin changes after Morpheus8 Burst, from the day of treatment to 1 month and beyond. *Progress varies from person to person. Please check together with aftercare. Contact us at any time about any symptoms that concern you.
Strong redness, warmth, and swelling
Strong, sunburn-like redness, stinging, and swelling appear (the swelling includes a temporary effect from the anesthetic fluid and goes down in a few days). Skincare such as face washing and toner is OK from 12 hours after treatment, and bathing is shower only on the day. Avoid touching or rubbing too much, alcohol, and strenuous exercise. Makeup is OK from 24 hours later (the next day).
Redness settles; roughness and dryness
Redness eases in 2 to 3 days, and dotted, scab-like roughness and dryness appear. Do not rub, and be thorough with moisturizing and sunscreen. Fine grid-like marks may be visible, but they can be covered.
Scabs come off and the skin becomes smoother
Roughness and small scabs come off naturally in about 5 days, and the skin surface becomes smoother. The guide for downtime is 5 days to 1 week (roughness may remain on the neck for about 2 weeks).
You feel a firm tightening
This is when the skin tightens firmly and you tend to notice a sharper contour and slimmer face. Rebuilding of collagen is underway.
You notice changes in sagging, pores, and unevenness
As collagen and elastin regenerate, changes in sagging, sagging pores, and uneven acne scars become easier to notice. The guide for the next treatment is about 1.5 months later. With 3 to 5 sessions, more stable changes can be expected.
AftercareHow to Spend the Time After Treatment (Aftercare)
- 01
- Cooling and thorough moisturizing
Strong redness and warmth appear on the day. Cool gently, and skincare such as toner is OK from 12 hours after treatment. Replenish moisture with simple, gentle moisturizing. Dryness tends to prolong downtime.
- 02
- Wash gently without rubbing
Face washing is OK from 12 hours after treatment, gently with lukewarm water. Pat dry with a towel instead of rubbing. Do not force off dotted scabs; wait for them to come off naturally.
- 03
- UV protection is essential
Skin after treatment is sensitive to UV rays, and the risk of pigmentation rises. Be thorough with UV care using sunscreen, a hat, and a parasol. Makeup is OK from 24 hours later (the next day).
- 04
- Pause harsh care
For a few days, pause harsh ingredients such as retinol, high-concentration vitamin C, and peels. Once your skin settles, gradually return to your usual care.
Aftercare
- Moisturize often and use plenty of sunscreen
- Wash and do skincare gently, without rubbing
- Wait for scabs and roughness to come off naturally
- Contact us early if any symptom lasts
What to avoid
- Alcohol, strenuous exercise, sauna, and baths on the day of treatment (shower only on the day)
- Forcing off scabs, touching too much, rubbing too much
- Strong friction and harsh skincare for a few days
- A strong tan (risk of pigmentation and inflammation)
DurationHow Long Results Last and Guide to Maintenance
“How long do results last?” “How often should I come after that?” We answer these common questions with a guide. *Results and duration vary from person to person.
When changes appear
Rebuilding of collagen and elastin progresses slowly after treatment, so changes appear over 1 to 3 months. It is not an instant treatment but one that “builds up” your skin.
How it feels after one course
After a course of 3 to 5 sessions at a pace of once every 1.5 months, most people find it easier to enjoy good skin for about 6 months to 1 year. However, skin keeps changing with age and lifestyle, so the effect is not permanent.
Guide to maintenance
To maintain the rebuilt foundation, maintenance treatment about once every 6 months to 1 year is recommended. When sagging or acne scars are deep, additional treatments help stabilize the results.
*The recommended number of sessions, intervals, and maintenance frequency vary with your skin and the depth of your concern. We suggest the best schedule at your consultation.
PricePrices
All prices include tax. Consultation and first-visit fees are free.
FACEFace and jawline
EYEEye area (doctor treatment)
NECKNeck
*Model prices are for patients who agree to the conditions (such as providing case photos). Please check details at your consultation.
*Prices are per session. The recommended number of sessions and intervals vary with your skin.
*All prices include tax. Consultation and first-visit fees are free.
CombinationCombination Menu for Synergy
Morpheus8 Burst is a treatment that “rebuilds the skin’s foundation.” Combining it with treatments that play different roles, such as skin-hydrating injections, Rejuran, and HIFU, can further raise results for sagging, pores, and skin quality.
Liposuction
Role: removing excess fat volume
It physically removes excess fat from areas such as the jawline and under the chin for a cleaner contour. Combined with Morpheus8 Burst’s tightening, it refines the jawline through both tightening and volume adjustment.
Skin boosters
Role: boosting the skin’s own regenerative power
They deliver active ingredients directly to the skin, supporting repair and regeneration. They point in the same direction as microneedling’s regenerative action, aiming for synergy in firmness, fine lines, and texture.
Quantum
Role: lifting the deep SMAS and fascia
While Morpheus8 handles “skin texture and shallow to mid layers,” Quantum handles “lifting deeper layers.” By dividing the roles, it aims for both tightening and lift.
*Whether combinations are possible, and their order and intervals, vary with your skin. We suggest the best combination at your consultation. Please check each treatment’s price list for prices.
RiskDowntime, Risks, and Precautions
So that you can consider it with peace of mind, we clearly state possible risks and side effects,
and who cannot receive the treatment.
-
Downtime
- About downtime
-
- Strong redness, warmth, and swelling appear right after treatment. Redness eases in 2 to 3 days.
- Needle marks (dotted scabs and roughness) may appear for about 5 days, and the guide for downtime is 5 days to 1 week (the neck may feel rough for about 2 weeks).
- Makeup is OK from 24 hours after (the next day), and face washing and toner from 12 hours after. Avoid touching or rubbing too much on the day.
- Please avoid strenuous exercise, sauna, and alcohol on the day of treatment. Bathing is shower only on the day.
-
SIDE EFFECTS
- Possible side effects
-
- Erythema (redness), edema (swelling), warmth, dryness (ease within a few hours to a few days)
- Scabs and pinpoint bruising (can be covered with concealer; fade naturally)
- Rarely, pigmentation or worsening of melasma
- Extremely rarely, blisters, burns, or scarring. Please contact us promptly if symptoms last.
-
CONTRAINDICATIONS
- Who cannot have this treatment
-
- Those who are pregnant or breastfeeding
- Those with a pacemaker or metal / electronic devices in the body
- Those with severe skin disease, inflammation, or infection in the treatment area
- Those prone to keloids, or with metal such as gold threads in the skin
About the device and self-pay treatment
- This is a self-pay treatment (not covered by health insurance).
- The domestic approval status of the device and how it was obtained are explained at your consultation.
- When an unapproved device is used, there may be no domestically approved medical device that guarantees the same effects and safety.
- For points to note about personal import, please see the website of the Ministry of Health, Labour and Welfare.
DoctorOur Doctors
DirectorDr. Tsubasa Hayami, Clinic Director
What matters in skin-regeneration treatments like Morpheus8 Burst is the treatment design: “to which depth, and how much heat.” In particular, delicate, anatomically difficult areas with thin skin, such as around the eyes, are treated directly by me and our clinic’s doctors. Based on anatomical knowledge built up in oculoplastic surgery, we deliver treatment safely, judging depth and output one by one.
— Specialties: facial liposuction / slim-face design / facial contouring / injectables / upper arm and leg liposuction
- Graduated from Kanazawa Medical University
- Department of Ophthalmology, Juntendo University
- Director, Tennoji branch of a major cosmetic surgery clinic
- Wing clinic Toyonaka opens
- Botox Vista / Juvéderm Vista certified doctor
- Alma Tune Lifting certified physician
- Onda Lift Kansai training physician / Oligio Kiss certified physician
- Facial liposuction: 1,000+ cases (Apr 2023 – Oct 2026)
FAQFAQ
Here are questions we often get before a visit. Please feel free to ask more detailed questions at your consultation.
QDoes Morpheus8 Burst hurt? Is anesthesia available?
It is a treatment with fairly strong pain. At our clinic, topical numbing cream is applied for about 30 minutes before treatment, and nitrous oxide sedation is also used during treatment. The pain centers less on “the moment of insertion” than on the moment heat is released and the tingling heat afterward. Sensitive areas such as those close to bone or around the eyes are treated while finely adjusting output and depth.
QHow long is the downtime?
Strong redness, warmth, and swelling appear right after treatment, but redness eases in 2 to 3 days. Needle marks (tiny scab-like dots) and roughness may appear for about 5 days, and the guide for downtime is 5 days to 1 week (the neck may feel rough for about 2 weeks). Face washing and toner are OK from 12 hours after, and makeup from 24 hours after (the next day).
QWhen do results appear? How many sessions should I have?
Because collagen and elastin are rebuilt, changes appear over 1 to 3 months after treatment. The guide is 3 to 5 sessions at a pace of once every 1.5 months. For deep concerns such as sagging and acne scars, continuing several sessions can be expected to give more stable changes. We suggest the number of sessions and intervals after examining your skin.
QHow do the conventional Morpheus8 and “Burst” differ?
The conventional Morpheus8 delivered radiofrequency to one depth per needle insertion. Burst can deliver heat continuously to several different depths (for example, shallow to deep layers) with one insertion. This allows a more even approach to multiple layers in one session, and can be expected to shorten treatment time and work efficiently on deep sagging and sagging pores.
QHow does it differ from Dermapen (microneedling)?
Dermapen is a treatment centered on “physical stimulation,” in which ultra-fine needles make tiny holes in the skin to promote regeneration through wound healing. In addition to inserting needles, Morpheus8 Burst delivers the heat of bipolar radiofrequency (RF) from the needle tips directly to the dermis and below the skin. Because immediate collagen contraction and heat tightening are added to physical stimulation, the big difference is that it can address not only pores and uneven acne scars but also deep layers such as “sagging,” which Dermapen is not good at. We suggest using them separately or in combination depending on your concerns.
QHow long do results last? Is maintenance needed?
After a course of 3 to 5 sessions at a pace of once every 1.5 months, most people find it easier to enjoy good skin for about 6 months to 1 year. However, skin keeps changing with age and lifestyle, so the effect is not permanent. To maintain the rebuilt foundation, we recommend maintenance treatment about once every 6 months to 1 year. When sagging or acne scars are deep, additional treatments help stabilize the results. Duration and the number of sessions needed vary from person to person.
QFor sagging, which is better: Morpheus8 Burst or HIFU?
They work on different layers with different principles. Morpheus8 Burst heats the dermis and below the skin with needles + radiofrequency (RF), rebuilding the firmness, texture, and sagging pores of the skin itself from within. HIFU, on the other hand, focuses ultrasound on deep layers such as the SMAS fascia to lift the foundation. Because sagging has causes in several layers, the two do not compete; combining them aims for synergy. We suggest the best treatment or combination for the main cause of your concern.
QWhat should I be careful of after treatment? (Aftercare)
On the day, cooling and moisturizing are important, and do not rub. Do not force off the dotted scabs; wait for them to come off naturally. Skin after treatment is sensitive to UV rays, so UV protection such as sunscreen is essential. On the day, avoid alcohol, strenuous exercise, and sauna, and take only a shower. Face washing and toner are OK from 12 hours after, and makeup from 24 hours after (the next day). For a few days, please pause strong care such as retinol, high-concentration vitamin C, and peels.
QIs it also effective for open pores and acne scars (craters)?
It is one of the concerns it handles best. Fractional RF promotes collagen production in the dermis, helping rebuild open pores, uneven acne scars, and scar tissue. Unlike lasers that resurface the surface, it rebuilds the foundation from the deep dermis, so it can be expected to raise skin texture and smoothness.
QCan delicate areas such as around the eyes be treated?
Yes. At our clinic, delicate, anatomically difficult areas with thin skin, such as around the eyes, are treated directly by a doctor. Experienced doctors, including our clinic director with a background in oculoplastic surgery, deliver treatment safely, judging depth and output one by one.
QI’m looking for a clinic in Toyonaka, Osaka, that offers Morpheus8 Burst
Wing clinic is a cosmetic dermatology and plastic surgery clinic in front of Hankyu Toyonaka Station in Toyonaka, Osaka. We have introduced InMode’s Morpheus8 Burst, and patients come from all over the Kansai region, including Osaka, Kobe, and Kyoto. Free consultations can be booked by phone or through our online booking form.
Contact us Booking & Inquiries
You can also book or ask questions via LINE!
Access
View on a larger map4F Toyonaka Ekimae Yasuda Building, 1-2-35 Honmachi, Toyonaka, Osaka
- 1 minute walk from Hankyu Toyonaka Station / 11 minutes by train from Umeda Station
- 15 minutes from Itami Airport / 15 minutes from Shin-Osaka Station
Hours
10:00–20:00 (last entry 19:00)
Closed: irregular *For more information, please contact us.
Departments: Cosmetic Dermatology, Cosmetic Surgery, Internal Medicine, Dermatology