1 minute from Toyonaka Station

Toward skin that makes its own collagen.

OsakaJuvelook

A skin booster containing PDLLA.

CE / MFDS approved Collagen-inducing type Improves acne scars and craters
Our Policy

Grow skin that makes its own collagen, from the structure up.

Plant-derived PDLLA (poly-DL-lactic acid) microparticles continuously stimulate fibroblasts in the dermis for 1 to 2 years, fundamentally boosting your own collagen production. A next-generation skin booster that answers acne scars, pores, firmness, and fine lines from the structure up.

— Wing clinic / Doctor

AboutWhat is Juvelook?

While conventional skin boosters “stimulate to invite collagen,” Juvelook is a next-generation collagen-inducing product in which PDLLA microparticles physically surround and continuously stimulate fibroblasts.

Conventional Approach

Chemically stimulating skin boosters

1

PN, PDRN, vitamins, and others chemically stimulate fibroblasts to invite collagen production

2

When the ingredients are metabolized and disappear from the body, the stimulation stops, so there is a limit to how long results last

3

Not good at structural unevenness such as acne scars and craters

Stimulation is temporary, so frequent treatments are needed to maintain results
Juvelook Approach

Collagen induction through sustained physical induction by PDLLA

1

PDLLA microparticles disperse and settle in the dermis, physically surrounding and continuously stimulating fibroblasts

2

PDLLA gradually breaks down over 6 months to 1.5 years. The collagen production induced during this process lasts 1 to 2 years

3

With the collagen production cycle running continuously, acne scars, pores, firmness, and fine lines improve from the structure up

A collagen-inducing cycle that lasts more than 1 year after completing a course of 3

Juvelook composition

Plant-derived PDLLA is the main ingredient. It physically and continuously stimulates fibroblasts in the dermis, keeping the collagen production cycle running over the long term.

PDLLA (poly-DL-lactic acid)
Main ingredient
42.5mg
PDLLA content
(main collagen-inducing ingredient)
1–2 years
PDLLA breakdown and duration
(collagen-inducing cycle)
2 approvals
EU (CE) and Korea (MFDS)
by regulators
Juvelook product

MechanismHow PDLLA’s Dual Action Works

A four-stage mechanism in which plant-derived PDLLA microparticles settle in the dermis and physically, continuously stimulate fibroblasts, keeping the collagen production cycle running over the long term.

  1. STEP 01

    Purification of plant-derived PDLLA

    Starch from corn and sugarcane is fermented to produce lactic acid, which is purified into high-purity PDLLA (poly-DL-lactic acid) microparticles of uniform size.

  2. STEP 02

    Formulated as an even suspension

    The PDLLA microparticles are formulated as a uniform suspension, precisely adjusted for even distribution when injected.

  3. STEP 03

    Direct injection into the dermis

    After numbing cream is applied, the product is evenly dispersed into the mid to deep dermis with microneedles or a cannula. The PDLLA microparticles settle in the dermis.

  4. STEP 04

    Sustained stimulation of fibroblasts

    PDLLA microparticles settled in the dermis physically surround and stimulate fibroblasts, inducing collagen production. They continue to promote collagen synthesis as they break down over 6 months to 1.5 years, and the induced effect lasts 1 to 2 years.

Where it acts in the skin layers

Juvelook’s PDLLA microparticles settle in the mid to deep dermis and drive the collagen production cycle through direct contact with fibroblasts.

Epidermis Moisture barrier and sebum film Dermis ← where PDLLA microparticles settle and act Fibroblasts / site of collagen production Subcutaneous tissue PDLLA microparticles (point of action)

*PDLLA microparticles disperse evenly in the mid to deep dermis. They continuously stimulate fibroblasts while breaking down over 6 months to 1.5 years, and the induced collagen production lasts 1 to 2 years.

SAFETY

by regulators

It has the EU CE mark and approval from Korea’s MFDS.

BIOCOMPATIBILITY

Plant-derived, fully biodegradable

Made from lactic acid derived from corn and sugarcane. As a biodegradable material that eventually breaks down completely into water and carbon dioxide in the body, the risk of build-up or foreign-body reaction is extremely low, and biocompatibility is high.

QUALITY

Developed by VAIM

Researched and developed by VAIM in Korea, a Korean aesthetic medicine manufacturer of PDLLA products, which manufactures Juvelook under quality control.

Effects6 Expected Effects

Collagen induction by PDLLA brings long-term, structural improvement that single-ingredient skin boosters cannot reach.

  • 01
    Fundamentally promotes your own collagen production

    PDLLA microparticles physically surround and continuously stimulate fibroblasts in the dermis. Rather than adding collagen from outside, it keeps the skin’s own collagen-producing mechanism running for 12 to 18 months.

  • 02
    Structural improvement of acne scars and craters

    Collagen growth fills the dermal tissue from the bottom of the indentations. Changes in the dermis, which skincare cannot reach, can be expected to physically lift the unevenness of acne scars and craters.

  • 03
    Tightening pores

    Higher collagen density in the dermis strengthens the supporting structure around pores. As skin tension improves, open pores become less noticeable. Pores caused by excess sebum may call for a different approach, so we recommend checking at your consultation.

  • 04
    More even, clearer skin

    As collagen production is promoted, dermal density becomes more even and skin texture is refined. It can also address acne scars with pigmentation and dull skin.

  • 05
    Improves firmness, elasticity, and fine lines

    Collagen growth and higher dermal density restore the skin’s firmness and elasticity. As the dermis thinned by aging and photoaging is rebuilt, surface fine lines and skin sagging improve.

  • 06
    Highly versatile with multiple devices

    Besides a focused local approach with doctor hand injection, it can be delivered evenly across the whole face in combination with the skin-hydrating injector. The best approach can be chosen for the treatment area and concern.

CheckIndication Map by Concern and Who It Suits

We have organized the concerns Juvelook is especially effective for, and how much improvement to expect.

Especially recommended for those who:

01 Bothered by acne scars or craters

For those with indentations or pigmentation left by past acne that foundation cannot fully cover. Collagen growth lifts the dermis, and structural improvement can be expected.

Indentations and pigmentation
02 Want to improve open pores and loss of firmness together

For those who want to address pores widened by aging or sebum and reduced elasticity at once. Higher dermal collagen density strengthens the supporting structure around pores.

Pores and firmness together
03 Want to avoid frequent visits and want long-lasting results

For those too busy for regular treatments, or who want long-term improvement from one investment. PDLLA breaks down over 6 months to 1.5 years, and the induced collagen effect lasts 1 to 2 years.

Long-lasting effect
04 Want to increase your own collagen

For those who want to draw out the skin’s own regenerative power rather than adding from outside. Physical stimulation by PDLLA keeps your own collagen production going for 12 to 18 months.

Promotes your own production
05 Feel you have reached the limits of skincare

For those who have tried every serum, booster serum, and sheet mask without change. A direct approach to the dermis changes the skin at the root, where skincare cannot reach.

Beyond the limits of skincare
06 Want to start preventive anti-aging

For those in their early 30s, for example, who have no major concerns yet but want to get ahead of future aging. Building a foundation for collagen production now makes a difference to your skin 10 years from now.

Preventive anti-aging

AreasTreatment areas and planning

Treatment can be planned for each area and concern, from the whole face to localized acne scars. The doctor designs the best amount, number of sessions, and approach at your consultation.

Treatment areas Guide amount Recommended sessions Interval Duration of effect
Eye area and fine lines 2cc 3 to 4 sessions 1 to 2 months More than 1 year
Cheeks and pores 2 to 4cc 3 to 4 sessions 1 to 2 months More than 1 year
Guide to amount and number of sessions The above is a general guide and varies with skin condition, depth of concern, and past treatment history. For acne scars and craters, more sessions may be needed depending on the depth of the indentations.

DeviceSkin-hydrating injector

Even, whole-face delivery with a stamp-type device. Mechanical control covers the whole face at a fixed depth and spacing, a “foundation-building” approach that creates a base for collagen production over a wide area.

What is Device Injection

What is a skin-hydrating injector?

A method that uses a skin-hydrating injector device to inject Juvelook evenly across the whole face at a preset depth and spacing. Mechanical control keeps needle depth and product amount constant, achieving a stable product distribution that does not depend on technique.

It is ideal for “foundation building,” creating a base for collagen production over a wide area, and its efficiency in covering the whole face in one session is also appealing. It is the most effective approach in the early phase of a course.

Hycoox device (skin-hydrating injector)
Injection depth and product distribution with the device Stamp device Epidermis The limit skincare can reach / ingredients don’t reach the dermis Dermis ← injection target Densely packed with fibroblasts / where collagen and elastin are made Even, wide distribution of PDLLA Subcutaneous tissue Role of the injected ingredient PDLLA microparticles → continuous stimulation of fibroblasts → collagen induction

Expected effects

01

Even, wide coverage

PDLLA microparticles are spread evenly across the whole face. It is ideal for building a base for the whole course, and a full treatment is completed in 20 to 30 minutes. Even product distribution means you can expect improvement without patchiness.

02

Consistent quality through device control

Needle depth and product amount are set automatically by the device, achieving even results without differences in the doctor’s technique.

03

Relatively short downtime

Redness usually settles in 1 to 2 days, and there are relatively few restrictions after treatment. It promotes collagen production while minimizing the impact on work and daily life.

Suited to

01

Want to lift firmness, pores, and dullness
across the whole face at once

Even PDLLA delivery across the whole face builds a foundation for collagen production over a wide area. Visible pores, loss of firmness, and dullness improve together.

Even improvement across the whole face
02

Those who want to build a broad
foundation in the early phase of a course

The 1st and 2nd sessions cover the whole face with the skin-hydrating injector and prepare the base for the later hand-injection phase. An efficient course design is possible.

Early phase of a course
03

Those who want a short treatment
and minimal downtime

A full treatment is completed in 20 to 30 minutes, and redness settles in 1 to 2 days. It also suits those trying a skin booster for the first time and busy people.

Low downtime

ManualHand injection by doctor

Precise point injection done directly by the doctor with a syringe. A high-precision approach that finely adjusts amount and depth while visually checking the shape and depth of indentations, reaching areas a device cannot.

What is Manual Injection

What is hand injection by a doctor?

A method in which the doctor uses a syringe to inject directly into target areas such as acne scars, craters, and deep wrinkles. Amount, needle angle, and depth can be finely adjusted while visually checking the shape, depth, and size of indentations.

A precise approach that builds up the dermis from the bottom of structural indentations that devices struggle to reach; the doctor’s skill and experience shape the result. It is ideal for the later phase of a course or for focused delivery to remaining indentations.

①
Direct injection with a syringeFilled directly into the bottom of indentations with a 1 ml syringe. Depth and amount can be adjusted in 0.1 ml increments
②
Concentrated point deliveryThe most precise technique, in which the doctor fills the bottom of boxcar and icepick craters under direct view

How injection works: cross-section diagram

Before treatment Dermal collagen loss → indentation persists After doctor hand injection Direct PDLLA filling → collagen induction and lifting Subcutaneous tissue and bone Collagen loss ↓ Acne scars and craters Epidermis and dermis Dermis (lacking collagen) Subcutaneous tissue Subcutaneous tissue and bone ↑ Lifted and improved PDLLA particles induce collagen Epidermis and dermis Dermis (filled with PDLLA) Subcutaneous tissue
BEFORE · Before treatment

Dermal collagen loss

A state in which fibroblasts and the collagen network in the dermis have been destroyed, for example by acne inflammation. The boundary between the bottom of the indentation and the subcutaneous tissue becomes unclear, and a structural depression that does not spring back when pressed from the surface is fixed in place. Skincare and topical medicines do not reach this layer, so an approach from within is needed.

AFTER · After injection

Direct PDLLA filling and collagen induction

While visually checking the depth and shape of the indentation, the doctor fills Juvelook directly from the bottom with a syringe. PDLLA continuously stimulates fibroblasts, and collagen grows over 1 to 2 months. The dermis is rebuilt from within and the indentation is gradually lifted.

Expected effects

01

Precise local delivery

The doctor checks the shape of the indentation directly and finely adjusts depth and amount. Different shapes, such as boxcar and icepick types, are treated individually.

02

Reaches areas devices can’t

Precise delivery is possible even to small areas that are hard for stamp devices to reach, such as the sides of the nose, around the eyes, and the corners of the mouth.

03

Available from the early stage of acne treatment

Approaching deep craters from the early stage after acne scars form releases the tissue before fibrosis progresses, maximizing the collagen-inducing effect.

04

Customized amount and depth

Because amount, depth, and technique can be changed by area, even those with several crater shapes can be treated optimally in one session.

Suited to

01

Want a focused approach to
acne scars and craters

The doctor checks the shape and depth of the indentation directly and fills from the bottom. It is the best approach for improving structural indentations that a stamp device cannot reach.

Acne scars and craters
02

Those who value the doctor adjusting
the amount and depth for each area

The shape of indentations differs by area. Hand injection, adjustable in 0.01 ml increments with the doctor’s skill, is the most customizable injection method.

Customized injection
03

Want to address acne scars at the root
from an early stage

Releasing the fiber bundles with Subcision at an early stage, before fibrosis progresses, draws out the maximum collagen-inducing effect.

Early root approach

SubcisionSubcision + direct injection

Our most precise approach, specialized for deep craters, in which Juvelook is filled immediately after the fiber bundles are cut with Subcision. Physical cutting of the fiber bundles and PDLLA collagen induction work at the same time.

What is Subcision + Direct Injection

What is Subcision + direct injection?

A high-precision approach in which, right after Subcision cuts the fiber bundles running beneath the bottom of acne scars and craters, Juvelook is filled directly into the space created.

The immediate lift from physically cutting the fiber bundles and the collagen-inducing effect of PDLLA work at the same time, and fundamental improvement can be expected for deep atrophic scars and boxcar craters that injection alone cannot reach. It is the most advanced and precise of the 3 approaches.

Step 1
SubcisionA special sharp-tipped needle cuts the fiber bundles at the bottom of the crater, releasing the cord-like tissue that tethered the skin and creating space for an immediate lift
Step 2
Direct filling with JuvelookJuvelook is injected into the space created right after cutting. PDLLA microparticles continuously stimulate fibroblasts, and collagen growth rebuilds the dermis

How Subcision works: cross-section diagram

Before treatment Fiber bundles pull the skin down → deep crater fixed After Subcision + filling Fiber bundles cut + PDLLA filling → two-stage lift Bone and deep tissue ← Fiber bundles ↓ Deep crater Epidermis and dermis Deep dermis (tethered by fiber bundles) Subcutaneous tissue Bone and deep tissue ✕ Cut ↑ Lifted and improved PDLLA particles induce collagen Epidermis and dermis Dermis (filled with PDLLA) Subcutaneous tissue
BEFORE · Before treatment

Skin tethered by fiber bundles

Fibrosis after acne inflammation forms cord-like fiber bundles running from the bottom of the crater toward the lower dermis. Because these fiber bundles tether the skin downward, injection alone cannot reach the bottom, and an indentation that seems pressed down from above persists.

AFTER · After treatment

Fiber bundles cut + PDLLA filling, a dual action

A special needle physically cuts the fiber bundles at the bottom of the crater, and Juvelook is filled immediately. The immediate lift from cutting and PDLLA collagen induction work at the same time. The dermis is rebuilt from within while the fiber bundles are prevented from reattaching.

Expected effects

01

Two-stage action: cutting the fiber bundles + filling

Right after Subcision cuts the fiber bundles at the bottom to create space, Juvelook is filled. Physical lifting and PDLLA collagen induction work at the same time.

02

A root approach to deep atrophic scars

Even deep indentations that injection alone cannot reach can be filled directly from the bottom of the dermis after Subcision. Its ability to treat severe craters is the highest of the 3 approaches.

03

An option when other treatments have not improved enough

It is positioned as the most advanced approach for stubborn craters that remain even after repeated skin-hydrating injector and doctor hand-injection treatments.

04

Collagen induction prevents reattachment

Filling the space created by cutting with PDLLA physically suppresses reattachment of the fiber bundles, making it easier for dermal rebuilding through collagen growth to take hold.

Suited to

01

Have several deep boxcar craters
or atrophic scars

Deep indentations tethered by fiber bundles cannot be reached at the bottom by injection alone. Releasing the fiber bundles with Subcision before filling is the most fundamental approach.

Severe craters
02

Saw little improvement
from other treatments

When enough improvement is not achieved even after several skin-hydrating injector or doctor hand-injection sessions, fiber bundles are often the main cause, and Subcision is an effective next option.

Stubborn acne scars
03

Want fundamental improvement
with the highest precision

It requires advanced skill from the doctor, but the dual action of cutting fiber bundles + PDLLA filling gives the highest ability to treat craters of the 3 approaches, ideal for those aiming for fundamental improvement.

Fundamental improvement

MethodsComparing 3 approaches

The characteristics of each approach organized by category. Use this to help choose the best option for your concerns and treatment phase.

Comparison Skin-hydrating injector Hand injection by doctor Subcision + direct injection
Main purpose Even full-face treatment / building a foundation Focused local care, indentation improvement Fundamental improvement of deep craters
Evenness ◎ △ △
Local precision △ ◎ ◎
Acne scars and craters ○ ◎ ◎
Treatment time 20–30 min 20–30 min 45 to 60 min
Downtime 1 to 2 days 2 to 3 days 1 to 2 weeks (bruising possible)
Recommended phase From first session to full course Finishing Early stage of acne treatment
Needle depth adjustment Set automatically by the device Set freely by the doctor for each area Doctor injects directly down to below the dermis
Level of pain Mild (managed with numbing cream) Mild to moderate (managed with numbing cream) Moderate (managed with numbing cream + local anesthesia)
Which approach should I choose?The final treatment method is decided by the doctor after checking your skin at your consultation. When acne scars are deep and widespread, a “combined plan” is most effective: building a whole-face base with the skin-hydrating injector while targeting remaining indentations with doctor hand injection or Subcision + direct injection. Please feel free to come in for a consultation.

ComparisonComparison with other treatments

Not all skin boosters are the same. Comparison data to help you accurately understand differences in mechanism, the concerns each is good at, and duration, so you can choose what suits your skin.

Comparison Juvelook Rejuran Re2O Skin-hydrating injector
Main ingredient PDLLA (poly-DL-lactic acid) PN (salmon-derived polynucleotides) hADM (human-derived acellular dermis) Hyaluronic acid and various vitamins
Mechanism Sustained physical stimulation by PDLLA DNA repair and cell activation Direct ECM replenishment Hydration and nutrient supply
Speed of results △ △ ◎ ◎
Collagen-inducing power ◎ ○ ○ △
Acne scars and craters ◎ ○ ○ △
Pore improvement ◎ ◎ ◎ ○
Duration More than 1 year 6–12 months 6–12 months 1 to 3 months
Recommended sessions (1 course) 3 to 4 sessions 3 to 4 sessions 3 sessions 3 to 6 sessions

Treatment profile comparison (5-axis radar chart)

5-axis rating: speed of results · dermal density · longevity · hydration · pore improvement (5 points each)

Juvelook PDLLA

Made by VAIM, Korea / plant-derived poly-D,L-lactic acid (PDLLA) microparticles

Mechanism

Plant-derived PDLLA (poly-D,L-lactic acid) microparticles settle in the dermis, surround and continuously stimulate fibroblasts, and induce your own collagen production. PDLLA is gradually biodegraded over 6 months to 1.5 years while continuing to stimulate, and the induced collagen production lasts 1 to 2 years. A PLA-based skin booster with EU CE and Korean MFDS approval.

Strengths
  • Lasts more than 1 year; after the course, it can be maintained with about one session a year
  • Specialized in structural improvement of acne scars and craters, lifting with collagen from the bottom of the dermis
  • Broadly addresses pores, firmness, and fine lines, from the whole face to specific areas
Recommended for Improving acne scars and craters / tightening pores / long-lasting results as a priority / fewer sessions
See the treatment page →
Rejuran PN

Made by PharmaResearch Products, Korea / salmon-derived polynucleotides + HA

Mechanism

Salmon-derived polynucleotides (PN) promote DNA repair and proliferation of fibroblasts and stimulate collagen production. The “HS (High Strength)” grade also contains high-concentration HA, strengthening immediate hydration and firmness compared with the standard product. Because PN itself directly “stimulates” cells, unlike Re2O it takes 2 to 4 weeks for results to appear.

Strengths
  • The skin booster with the most proven safety, backed by more than 10 years of clinical use
  • Also effective for acne scars, redness, and post-inflammatory pigmentation (DNA repair)
  • Can also be used around the eyes and on the neck
  • Dermal density improves the more sessions you build up in a course
Recommended for Acne scars and redness / overall anti-aging care / safety as top priority / combining with Re2O (to add fast results)
See the treatment page →
Sunekos Performa AA+HA

Made by Professional Dietetics, Italy / 6 amino acids + low-molecular-weight HA / non-animal

Mechanism

Six amino acids, glycine, L-proline, L-leucine, L-lysine, L-valine, and L-alanine, act directly on fibroblasts and induce collagen and elastin synthesis at the same time. The formula divides the roles: glycine, proline, leucine, and lysine work in collagen synthesis, and alanine and valine in elastin synthesis. With no crosslinking agent, no animal-derived ingredients, and a very small molecular size, it can be injected with a fine needle. It is characterized by combining 4 collagen-related and 2 elastin-related amino acids in a patented ratio.

Strengths
  • Induces production of both collagen and elastin at the same time (the biggest difference from Jalupro)
  • Among the shortest swelling and downtime (normal life possible from the next day)
  • Excels in thin-skinned, delicate areas such as around the eyes, neck, mouth, and backs of the hands
  • Free of cross-linking agents for a natural texture
Recommended for Minimal downtime / specialized care for the eyes and neck / lack of elasticity and elastin / first injectable and worried about swelling
See the treatment page →
Pluryal Densify PN+HA

Made by MD Skin Solutions, Luxembourg / PN + non-cross-linked HA + mannitol

Mechanism

A “3-step complex approach” that activates fibroblasts with PN (polynucleotides), immediately replenishes water density with non-cross-linked HA, and also removes reactive oxygen with mannitol (a powerful antioxidant). The biggest difference from Rejuran is that the antioxidant action of mannitol also improves dullness and oxidative damage. It achieves faster texture improvement than PN alone.

Strengths
  • A multi-angle approach combining 3 ingredients: PN, non-cross-linked HA, and mannitol
  • Antioxidant action (mannitol) also improves dullness and oxidative damage
  • Faster texture improvement than Rejuran, and longer-lasting than HA alone
  • Especially well regarded for improving clarity and glow
Recommended for Glow and dullness as a priority / adding antioxidant care / a balance of longevity and fast results / overall anti-aging care
See the treatment page →
Jalupro Super Hydro AA+HA

Made by Professional Derma SA, Switzerland / 7 amino acids + 3 peptides + non-crosslinked hyaluronic acid

Mechanism

Seven amino acids, glycine, proline, leucine, lysine, alanine, valine, and arginine (+ 3 peptides), directly supply the materials for collagen synthesis and support fibroblasts’ natural collagen production. Low- and high-molecular-weight non-crosslinked HA creates deep hydration and an environment that retains moisture in the tissue. With very little downtime, it is widely used on areas other than the face, such as the neck, décolletage, and backs of the hands.

Strengths
  • Natural collagen synthesis with amino acids (supplying materials rather than forced stimulation)
  • Deep hydration and a moisture-retaining tissue environment from high-molecular-weight HA
  • Very little downtime (low risk of swelling and bruising)
  • Widely used on non-facial areas such as the neck, décolletage, and backs of the hands
Recommended for Minimal downtime / anti-aging care for the neck, décolletage, and hands / deep hydration as a priority / complementing or alternating with Sunekos
See the treatment page →
Re2O hADM

Made by Humedix, Korea (Elravie brand) / human-derived acellular dermis (hADM)

Mechanism

It directly replenishes human-derived ECM components (89% collagen, 3% elastin, 0.4% hyaluronic acid) in the dermis. While other skin boosters “stimulate fibroblasts to make collagen,” Re2O is an approach that “physically replaces the lost extracellular matrix.” The hADM, decellularized with AlloClean technology, has extremely low immunogenicity, so despite being human-derived it rarely causes foreign-body reactions.

Strengths
  • Fast results: higher dermal density and firmness can be felt from the day of treatment to the next day
  • The only product that replenishes collagen, elastin, and HA at the same time
  • Can also be used on thin-skinned areas such as around the eyes, neck, and décolletage
  • Approved by the Korean MFDS, with more than 500,000 clinical cases worldwide
Recommended for Fast results as a priority / reduced dermal density / pores and fine crepey lines / lack of firmness around the eyes and neck / found other skin boosters not enough
See the treatment page →

FlowThe treatment process

From your first visit to the end of treatment takes about 90 to 120 minutes. Careful consultation beforehand and enough time for anesthesia keep pain to a minimum.

  1. 01
    Consultation and examination

    After checking the depth of acne scars, pore type, and past treatment history, we design the amount, number of sessions, and approach (doctor hand injection or combined with a device).

    Approx. 60 min
  2. 02
    Face washing

    You wash your face yourself to remove dirt, sebum, and makeup from the skin surface. Numbing cream is applied to clean skin, minimizing the risk of infection.

    Approx. 10 min
  3. 03
    Numbing cream

    Topical numbing cream is applied to the treatment area. If you are very anxious about pain, please let us know.

    Approx. 30 min
  4. 04
    Injection (Juvelook)

    After the numbing cream is removed, Juvelook is injected into the dermis by doctor hand injection or with a device. Whole-face treatment takes about 20 to 40 minutes. Focused local injection for acne scars is handled separately.

    Approx. 20 to 40 min
  5. 05
    Aftercare and precautions

    Moisturizing care is given after treatment. The doctor and staff will explain the precautions after you go home (limits on face washing, makeup, alcohol, and exercise).

    Approx. 5 min

PricePrices

All prices include tax

JUVELOOKJuvelook skin booster

MenuRegular price (incl. tax)Model price (incl. tax)
Juvelook 2cc (skin-hydrating injector)Regular price (incl. tax)40,000 yenModel price (incl. tax)19,800 yen
Juvelook 4cc (skin-hydrating injector)Regular price (incl. tax)65,000 yenModel price (incl. tax)39,600 yen
Optional: hand-injected by doctor (may be required in some cases)Regular price (incl. tax)22,000 yenModel price (incl. tax)—

SUBCISIONSubcision

MenuRegular price (incl. tax)Model price (incl. tax)
Subcision 2×2Regular price (incl. tax)22,000 yenModel price (incl. tax)—
Subcision 3×3Regular price (incl. tax)44,000 yenModel price (incl. tax)—
Subcision 4×4Regular price (incl. tax)66,000 yenModel price (incl. tax)—

ANESTHESIAAnesthesia options

MenuRegular price (incl. tax)Model price (incl. tax)
Numbing creamRegular price (incl. tax)3,300 yenModel price (incl. tax)—
Nitrous oxide sedationRegular price (incl. tax)5,500 yenModel price (incl. tax)—

RiskRisks and precautions

Juvelook has EU CE and Korean MFDS approval, but like all injectable treatments, it carries risks. Please make your decision based on accurate information.

  • Downtime
    Downtime
    • Right after treatment to the next day: needle marks, pinpoint redness, and mild swelling (most fade naturally in 2 to 3 days)
    • Bruising in rare cases: fades within 1 to 2 weeks and can be covered with concealer
    • On the day: face washing and showers OK. Makeup from the next day
    • For 24 hours after treatment: avoid alcohol, strenuous exercise, and sauna
    • For 1 week after treatment: avoid strong stimulation or massage of the treated area
  • Side Effects
    Side effects and complications
    • Redness, swelling, and bruising: incidence 30 to 50%. Most fade within a few days
    • Pain and warmth: minimized with numbing cream. Fades within a few hours after treatment
    • Firm lumps (nodules): rare. Most fade naturally within a few weeks to months
    • Allergic reactions: low incidence, but always tell us your medical history before treatment
    • Infection and inflammation: extremely rare. If it occurs, contact the clinic promptly
  • Contraindications
    Who cannot have this treatment
    • Those who are pregnant, breastfeeding, or may be pregnant
    • Those prone to keloids (risk of excessive collagen production)
    • Those with collagen disease or an autoimmune disease
    • Those with an active infection, inflammation, or herpes in the treatment area
    • Those with severe diabetes or taking immunosuppressants
    • Those using acne medications (isotretinoin-type) or steroids, please consult us
  • Aftercare
    Aftercare and precautions
    • Be thorough with UV protection (sunscreen, hat) for 1 week after treatment
    • Keep up moisturizing care from the day of treatment, prioritizing recovery of the skin barrier
    • Do not rub or press the treated area hard
    • Results take 2 to 4 weeks to appear, so be patient and watch how it progresses
    • If anything unusual occurs (severe pain, high fever, sudden swelling), see a doctor promptly
Wing clinic’s risk management policy At the consultation before treatment, we check contraindications and medical history in detail, and may decline treatment for those for whom it is not suitable. We also explain how side effects will be handled if they occur. Claims of “zero side effects” are inappropriate under the medical advertising guidelines, so we do not make them.

DoctorOur Doctors

Medical reviewer

DirectorDr. Tsubasa Hayami, Clinic Director

A cosmetic surgeon who provides refined facial contouring based on careful design and medical evidence. Drawing on proven technical skill and evidence-based knowledge, he recommends the best, least burdensome treatment for each patient’s bone structure, expressions, and lifestyle.

— Specialties: facial liposuction / slim-face design / facial contouring / injectables / upper arm and leg liposuction

CAREER
  • Graduated from Kanazawa Medical University
  • Department of Ophthalmology, Juntendo University
  • Director, Tennoji branch of a major cosmetic surgery clinic
  • Wing clinic Toyonaka opens
LICENSES & ACHIEVEMENTS
  • Botox Vista / Juvéderm Vista certified doctor
  • Alma Tune Lifting certified physician
  • Onda Lift Kansai training physician / Oligio Kiss certified physician
  • Facial liposuction: 1,000+ cases (Apr 2023 – Oct 2026)

FAQFAQ

Here are questions we often get about Juvelook. Please feel free to ask any questions at your consultation too.

QWhat kind of treatment is Juvelook?
A

Juvelook is a PLA-based skin booster whose main ingredient is plant-derived PDLLA (poly-DL-lactic acid). The injected PDLLA microparticles continuously stimulate fibroblasts in the dermis physically and promote your own collagen production over 1 to 2 years. It was developed by VAIM in Korea and has the EU CE mark and approval from Korea’s MFDS (Ministry of Food and Drug Safety).

QHow are Juvelook and Rejuran different?
A

Rejuran’s main ingredient is salmon-derived PN (polynucleotides), a “cell-activating” type in which nucleic acids promote DNA repair and proliferation of fibroblasts. Juvelook is a “collagen-inducing” type in which PDLLA microparticles physically surround and continuously stimulate fibroblasts, and its strength is improving structural unevenness such as acne scars and craters. Because their mechanisms are fundamentally different, using them for different concerns or combining them may give a synergistic effect. We will suggest the best choice at your consultation.

QWhen do Juvelook’s effects appear? How many sessions until I notice them?
A

The full effects of collagen induction (firmness, pores, and acne-scar improvement) gradually begin to appear after 2 to 4 weeks and are said to peak 6 to 8 weeks after completing a course of 3. Results last more than 1 year, after which maintenance about once a year is recommended. It is not a treatment that “changes dramatically in one session,” but a mid- to long-term treatment in which the skin changes as the collagen production cycle gets going.

QIs Juvelook effective for improving acne scars and craters?
A

Juvelook is a skin booster that excels at improving acne scars and craters. PDLLA microparticles intensively stimulate fibroblasts in the dermis at the indented areas, and a lifting effect from collagen growth can be expected. For localized indentations in particular, direct injection by doctor hand injection is effective. However, deep craters (such as icepick type) need several sessions, and complete disappearance is not guaranteed. Combining it with other treatments such as fractional laser may also be considered.

QHow long is the downtime for Juvelook?
A

Needle marks, redness, and mild swelling may appear right after treatment, but most people heal naturally in 2 to 3 days. In the rare case of bruising, it fades within 1 to 2 weeks and can be covered with concealer. Face washing and showers are OK from the same day, and makeup from the next day. For 24 hours after treatment, avoid alcohol, strenuous exercise, and hot saunas. Social downtime is as short as the same day to the next day, and most people return to normal life from the next day.

QIs there anyone who cannot receive Juvelook?
A

This treatment is not available to those who are pregnant or breastfeeding, those prone to keloids, those with collagen disease or an autoimmune disease, or those with an active infection or inflammation in the treatment area. Those with severe diabetes or taking immunosuppressants are also not eligible. If you are using steroids or certain acne medications (isotretinoin-type), or taking anticoagulants or supplements, please consult us in advance. Anything unclear can be checked at your consultation.

Contact us Booking & Inquiries

You can also book or ask questions via LINE!

Map to Wing clinic Toyonaka

4F Toyonaka Ekimae Yasuda Building, 1-2-35 Honmachi, Toyonaka, Osaka

  • 1 minute walk from Hankyu Toyonaka Station / 11 minutes by train from Umeda Station
  • 15 minutes from Itami Airport / 15 minutes from Shin-Osaka Station

Hours

10:00–20:00 (last entry 19:00)
Closed: irregular *For more information, please contact us.
Departments: Cosmetic Dermatology, Cosmetic Surgery, Internal Medicine, Dermatology

Book online
here