1 minute from Toyonaka Station
Rebuild your skin from its “pillars.”
OsakaJalupro
Super Hydro
A next-generation skin-booster injection of amino acids × peptides × high-concentration hyaluronic acid.
Wing clinicToyonaka
Booking & Inquiries 06-6318-8774 Call
[Hours] 10:00-20:00 / Last entry 19:00
Rebuild your skin’s pillars from the materials up.
Collagen decreases with age because there are “not enough materials.” Jalupro Super Hydro delivers 7 amino acids, 3 peptides, and 80 mg of non-cross-linked hyaluronic acid directly to the dermis, supplying both the “materials” and the “activation signals” for collagen synthesis. It is a next-generation skin-booster injection by Professional Derma SA of Switzerland.
— Wing clinic / DoctorContents
Tap to jump to a section
AboutWhat is Jalupro Super Hydro?
An amino acid × peptide × high-concentration hyaluronic acid complex approach
that changes the “common sense” of skin boosters.
Rather than “forcing collagen production by stimulation,” it “delivers the materials themselves.”
Only “stimulates and induces”
collagen production
Stimulating factors such as PN or retinol are injected
Fibroblasts are stimulated and activated
Your own collagen is (eventually) produced
If fibroblasts have become inactive with age or the materials for synthesis are depleted, stimulation alone is less effective
A “two-wheel approach” of
supplying materials + activation
7 amino acids directly supply the “building materials” for collagen and elastin synthesis
High-molecular-weight hyaluronic acid (2000 kDa) physically supports and strengthens the ligaments
3 peptides precisely activate fibroblasts and speed up synthesis
It resolves the lack of materials while also promoting production. Results are felt in two stages: the immediate effect of hyaluronic acid and the long-term effect of amino acids
Composition of Jalupro Super Hydro: A Complex Design of 3 Categories and 10 Ingredients
Three pillars: non-cross-linked hyaluronic acid (high + low molecular weight), 7 amino acids, and 3 peptides. It is a complex formula designed by Professional Derma SA of Switzerland, in which each works on the skin at a different layer and through a different mechanism.
(per 2.5 ml, among the highest)
(for both collagen and elastin)
(activate fibroblasts in multiple ways)
(highest safety class for medical devices)
Jalupro Super Hydro
Jalupro Super Hydro
The top-grade skin-booster injection in the series, developed by Professional Derma SA of Switzerland. A complex formula combining non-cross-linked hyaluronic acid (high molecular weight 2000 kDa + low molecular weight 200 kDa) at among the highest concentrations, 80 mg/2.5 ml in total, with 7 amino acids and 3 peptides. It strengthens the ligaments (the face’s supporting ligaments) from within, achieving hydration, collagen production, and elastin regeneration at the same time.
- —European CE mark Class III (the highest safety standard for medical devices)
- —Non-cross-linked design (unlike fillers, excessive puffiness is unlikely, and it can be dissolved with hyaluronidase)
- —No animal-derived ingredients, made in Italy, highly biocompatible formula
- —A higher grade than the company’s Sunekos series (more amino acids, more hyaluronic acid, and added peptides)
MechanismHow the Ingredients and Mechanism Work
Amino acids that “deliver materials,” high-molecular-weight hyaluronic acid that “supports,” and peptides that “activate.”
The 3 categories of ingredients work together in 4 stages to rebuild the skin’s foundation.
-
STEP 01
High-molecular-weight hyaluronic acid (2000 kDa) supports the ligaments
The injected high-molecular-weight non-cross-linked hyaluronic acid settles around the ligaments (supporting ligaments) that shape the facial contour. It physically tightens ligaments that have stretched and loosened with age, supporting jawline sagging from within. The highly water-retaining non-cross-linked hyaluronic acid also provides immediate hydration.
-
STEP 02
Low-molecular-weight hyaluronic acid (200 kDa) promotes elastin production
Low-molecular-weight non-cross-linked hyaluronic acid penetrates to the upper dermis and activates elastin-production signals. With a two-layer design in which high-molecular-weight hyaluronic acid provides “deep support” and low-molecular-weight hyaluronic acid provides “elasticity regeneration,” it improves facial contour and firmness at the same time.
-
STEP 03
7 amino acids supply the materials for collagen and elastin synthesis
Seven amino acids, including glycine, proline, and lysine (the 3 main raw materials of collagen) and alanine and valine (involved in elastin synthesis), directly supply “building materials” to fibroblasts. About 33% of collagen is glycine and about 15% is proline, so resolving this lack of materials is at the heart of anti-aging.
-
STEP 04
3 peptides activate fibroblasts in multiple ways
Three peptides, one promoting collagen synthesis, one promoting cell proliferation, and one moisturizing and reducing swelling, act on fibroblast receptors. With both amino acids (material supply) and peptides (activation signals) in place, more efficient collagen and elastin production is expected than with simple stimulating products.
European CE mark Class III
It has obtained “Class III,” the highest safety class under the EU Medical Device Regulation (MDR). Because it is non-cross-linked hyaluronic acid, unlike cross-linked fillers it is unlikely to cause excessive puffiness or hardening, and if needed it can be dissolved with a hyaluronic acid–dissolving enzyme (hyaluronidase). It is a highly biocompatible product with no animal-derived ingredients.
From Switzerland, made in Italy, more than 10 years of clinical use
Professional Derma SA is a company specializing in medical devices, based in Lugano, Switzerland. The Jalupro series has been used for more than 10 years in cosmetic dermatology clinics in Europe and Asia. Together with Sunekos (made by Professional Dietetics), in the same category of amino-acid-based skin boosters, it is highly regarded by many specialists.
A multilayer approach made possible by non-cross-linked hyaluronic acid
Cross-linked fillers are designed to stay in a specific area, but Jalupro’s non-cross-linked hyaluronic acid spreads naturally in the tissue, covering from deep to surface layers at once with its high- and low-molecular-weight layers. Because it works evenly over a wide area together with the amino acids and peptides, a brighter tone, firmness, and lift are felt across the whole face.
LigamentLigament injection
A structural lifting injection method that directly targets the face’s “skeletal support.”
With no scalpel and minimal downtime, it lifts the jawline from within.
What are ligaments (supporting ligaments)?
Ligaments are the “supporting ligaments” that anchor the skin and SMAS (superficial musculoaponeurotic system) to the facial skeleton. When we are young, these ligaments hold the skin firmly up from the bone, so the cheeks sit high and the jawline stays sharp.
As the collagen fibers of the ligaments deteriorate and stretch with age, they can no longer support the skin and subcutaneous tissue, and sagging begins with gravity. This is the root cause of “sagging.” Serums and massage have little effect on it because ligaments are “structures” deep beneath the skin.
How ligament injection works: cross-section diagram
How ligaments change with age and the effect of injection
Aging, UV rays, and weight changes cause the collagen fibers of the ligaments to degrade and stretch. Skin and fat that have lost support are pulled down by gravity, and the fullness of the cheeks moves below the nasolabial folds. This “structural collapse” is why the jawline becomes less defined. Skincare and surface-level care cannot address this change.
The high-molecular-weight hyaluronic acid (2,000 kDa) in Jalupro Super Hydro settles in the connective tissue around the ligaments, physically supporting and reinforcing stretched ligaments. This lifts sagging skin from within and restores the jawline. Unlike surgical methods that “lift and fix,” it is an approach that assists the ligaments’ natural supporting function.
Expected effects
Jawline lift
As high-molecular-weight hyaluronic acid supports loosened ligaments from within, sagging of the cheeks and jaw is physically lifted. There is no filler-like “puffiness,” and natural sharpness returns.
A more defined jawline and less double chin
Reinforcing the mandibular ligament lifts skin and fat that have sagged along the jawline. It helps improve a double chin and define the facial contour.
Suited to
Those bothered by sagging cheeks or a blurred jawline
Sagging of the SMAS layer due to loosened ligaments is the main cause of sagging cheeks and a blurred jawline. High-molecular-weight hyaluronic acid fills the tissue around the ligaments, rebuilding the jawline from within. Rather than physically lifting like a thread lift, it restores the natural supporting structure, so an unnatural tight feeling or discomfort is unlikely. Collagen production becomes active 2 to 4 weeks after treatment, and as your own tissue grows stronger in supporting the face, results increase step by step.
Jawline and cheeksThose who want to improve nasolabial folds and marionette lines naturally
Loosening of the zygomatic and masseteric cutaneous ligaments causes the skin to droop, deepening nasolabial folds and marionette lines. Strengthening the ligaments restores support, and a natural lift can be expected. Unlike filling the grooves directly with filler, it targets the supporting tissue that is the cause, so smiling movements do not look unnatural. Its feature is a natural result that follows changes in expression and blends with mature skin.
Nasolabial folds and around the mouthThose in their late 30s to 50s who are starting to see sagging in their contour
This is the period when loosening of the ligaments and loss of collagen with age overlap. Addressing it early slows the progress of sagging and helps keep a natural jawline for longer. At this age the skin’s recovery power is still high, so tissue regeneration in response to injection is also likely to be active. Starting in your late 30s can also reduce the frequency and intensity of treatments needed in the future.
Late 30s to 50sSkin RenewalSkin-booster injections
An injection method that delivers amino acids, peptides, and high-concentration hyaluronic acid directly to the dermis, awakening the skin’s own regenerative power.
Rather than “moisturizing,” it is an approach that helps the skin regain its own ability to stay moisturized.
What are skin-booster injections?
Skin-booster injections deliver the “raw materials (amino acids)” and “activation signals (peptides)” needed for collagen and elastin synthesis directly to the fibroblasts in the dermis. The necessary ingredients can be placed exactly where they are needed in the dermis, which topical products cannot reach.
The root cause of collagen loss with age is a “lack of materials + weaker production commands.” Skincare ingredients do not reach the dermis, so they cannot solve this problem. Delivering them directly deep into the dermis by injection makes fibroblasts begin actively producing collagen and elastin.
The essence of skin-booster injections is the idea that rather than “adding” collagen, the skin regains its “power to make it itself.” It is an approach that changes the quality of the skin itself from within, rather than temporarily caring for the surface.
The 80 mg of non-cross-linked hyaluronic acid in Jalupro Super Hydro spreads evenly in the tissue, improving the water-retaining ability of the skin structure itself. You can feel it as a “plump, bouncy” texture from the day after treatment. The collagen-producing effect of the amino acids and peptides begins to appear in about 2 to 4 weeks, and changes in skin quality become clear over a course of 3 to 4, so it is valued as mid- to long-term anti-aging care.
Expected effects in detail
Long-lasting hydration from deep within
80 mg of non-cross-linked hyaluronic acid settled directly in the dermis improves the water-retaining ability of the skin structure. With hydration from deep layers that serums cannot reach, you can feel a “plump, bouncy” texture from the day after treatment. Results last about 3 to 6 months as a guide.
Promotes collagen and elastin production
The 7 amino acids supply materials for synthesis to fibroblasts and the 3 peptides send production signals, promoting the growth of your own collagen and elastin. The production cycle continues even after the injected ingredients have faded.
Overall improvement of skin quality, texture, and firmness
As the quality of the dermis is raised, visible pores, dullness, rough texture, and lack of firmness improve together. It is not simply “adding moisture” but an approach that regenerates the skin structure.
Indication Map by Skin Concern
*Suitability is a reference value showing tendencies based on the nature of the approach. For jawline sagging, we recommend combining it with ligament injection.
Suited to
Are bothered by dryness,
dullness, or lack of firmness
80 mg of non-cross-linked hyaluronic acid retains water deep in the dermis, and the amino acids promote collagen and elastin production. It brings lasting firmness and clarity from layers skincare cannot reach.
Hydration, firmness, clarityWant to improve skin quality
at the root
It supplies amino acids and peptides directly to the dermis, which topical products cannot reach, and activates fibroblasts. It raises collagen and elastin production and changes skin texture from its foundation.
Better skin quality, stronger foundationFeel you have reached the limits
of skincare
Even ingredients that never reach the dermis, no matter how expensive the serum, reach the target layer reliably by direct injection. It makes possible a dermal renovation beyond the barrier of skincare.
The next step after skincareWant to improve pores,
texture, and fine lines
Higher dermal collagen density refines texture and improves visible pores and shallow fine lines. The activating action of the peptides also speeds up results, and many people notice changes in skin quality soon after treatment.
Pores, texture, fine linesWant to start preventive anti-aging
from your late 20s
Collagen decreases by about 1% a year after age 25. By replenishing and activating it before visible sagging appears, you can keep the pace of aging gentle.
Preventive anti-agingAre bothered by fine crepey lines
on the neck and décolletage
Treatment is possible not only on the face but also on the neck and décolletage. It suits thin, delicate skin and improves fine crepey lines and dryness from the dermis, giving a more youthful look around the neck.
Neck and décolletage careAreasTreatment areas and recommended sessions
It treats a wide range of areas, from the whole face to the neck, décolletage, and backs of the hands.
The amount and recommended number of sessions vary with the area and skin condition.
| Treatment area | Standard amount | Recommended sessions | Interval | Maintenance |
|---|---|---|---|---|
| Full facePopular | 2.5ml | 3 to 4 sessions | Every 4 weeks | Every 3 to 6 months |
| Neck and décolleté | 2.5 to 5 ml | 3 to 4 sessions | Every 4 weeks | Every 3 to 6 months |
ComparisonHow it compares with other treatments
“How is it different from Sunekos?” “What about Rejuran? Re2O?”
We honestly compare 6 treatments: Jalupro Super Hydro, Sunekos, Rejuran, Re2O, Juvelook, and Pluryal Densify,
on speed of results, dermal density improvement, longevity, hydration, and pore improvement.
Treatment profile comparison (5-axis radar chart)
5-axis rating: speed of results · dermal density · longevity · hydration · pore improvement (5 points each)
Made by Professional Derma SA, Switzerland / 7 amino acids + 3 peptides + 80 mg of non-cross-linked hyaluronic acid
A three-pillar complex approach: 80 mg of non-cross-linked hyaluronic acid (high molecular weight 2000 kDa + low molecular weight 200 kDa) physically supports the ligaments, while 7 amino acids supply the “building materials” for collagen and elastin synthesis and 3 peptides activate fibroblasts in multiple ways. While stimulating products (such as PN) “whip the fibroblasts,” Jalupro is designed to “hand over the materials and start the engine.”
- Jawline lift by strengthening ligaments with high-molecular-weight hyaluronic acid
- Contains 80 mg/2.5 ml of hyaluronic acid; deep hydration felt from the next day
- Wide range of uses: face, neck, décolletage, and backs of the hands
- Among the shortest downtimes; makeup OK the same day
Made by Professional Dietetics, Italy / 6 amino acids + low-molecular-weight hyaluronic acid / not animal-derived
Six amino acids (glycine, L-proline, L-leucine, L-lysine, L-valine, and L-alanine) act directly on fibroblasts, inducing collagen and elastin synthesis at the same time. The manufacturers differ: Sunekos is made by Professional Dietetics (Italy), and Jalupro by Professional Derma SA (Switzerland). With a 6-amino-acid formula including amino acids specialized for elastin synthesis (alanine and valine), it excels in thin-skinned areas such as around the eyes and the neck. Compared with Jalupro, it has only low-molecular-weight hyaluronic acid and no peptides.
- Induces production of both collagen and elastin (contains elastin-specialized amino acids)
- Good for delicate areas such as around the eyes, neck, and mouth
- Among the shortest downtimes (similar to Jalupro)
- Free of cross-linking agents, natural texture
Made by PharmaResearch Products, Korea / salmon-derived polynucleotides + hyaluronic acid
Salmon-derived polynucleotides (PN) promote DNA repair and proliferation of fibroblasts and stimulate collagen production. The HS (High Strength) grade contains high-concentration hyaluronic acid for stronger immediate hydration. Results are slow to appear, taking 2 to 4 weeks, but it is also strong at improving acne scars, redness, and post-inflammatory pigmentation.
- Among the most proven for safety, with more than 10 years of clinical use
- Also effective for acne scars, redness, and post-inflammatory pigmentation
- Dermal density improves the more sessions you build up in a course
Made by VAIM, Korea / poly-D,L-lactic acid (PDLLA) microparticles + low-molecular-weight hyaluronic acid
When PDLLA (poly-D,L-lactic acid) microparticles are injected into the skin, the body recognizes them as “foreign bodies,” deliberately triggering a foreign-body reaction (inflammation → repair). It is a leading “biostimulator” in which large amounts of collagen are produced during this repair process. Results are slow, appearing 4 to 8 weeks after injection, but the collagen once made lasts a long time, so it can be maintained with treatment once or twice a year.
- Among the longest-lasting (6 to 12 months); maintenance possible once or twice a year
- Produces a lot of collagen and treats moderate to severe sagging and deep wrinkles
- Effective over wide areas such as the cheeks, jawline, and forehead
Made by MD Skin Solutions, Luxembourg / PN + non-cross-linked hyaluronic acid + mannitol
A “3-step complex approach” that activates fibroblasts with PN (polynucleotides), immediately replenishes water density with non-cross-linked hyaluronic acid, and removes reactive oxygen at the same time with mannitol (a powerful antioxidant). Its feature is that it also improves dullness and oxidative damage.
- Antioxidant action (mannitol) also improves dullness and oxidative damage
- 3-ingredient complex approach of PN, hyaluronic acid, and antioxidants
- Well regarded for improving glow and clarity
Made by Humedix, Korea (Elravie brand) / human-derived acellular dermal matrix (hADM)
A “replenishment” approach that directly replenishes human-derived ECM components (89% collagen, 3% elastin) in the dermis. While Jalupro “promotes synthesis,” Re2O “physically replaces lost components.” It works fast and excels at directly improving dermal density, but provides little hydration from hyaluronic acid.
- Fast results: higher dermal density and firmness can be felt from the day of treatment to the next day
- Especially effective for pores and fine crepey lines
- Approved by the Korean MFDS, with more than 500,000 cases
Detailed comparison (6 treatments)
| Comparison | Jalupro SH AA7 + peptides 3 + hyaluronic acid |
Sunekos AA×6 + hyaluronic acid |
Rejuran HS PN + hyaluronic acid |
Re2O hADM |
Juvelook PDLLA + low-molecular-weight hyaluronic acid |
Pluryal Densify PN + hyaluronic acid + antioxidants |
|---|---|---|---|---|---|---|
| Ingredients | 7 AA + 3 peptides + 80 mg non-cross-linked hyaluronic acid |
6 AA + low-molecular-weight hyaluronic acid | Salmon-derived PN + hyaluronic acid |
Human-derived ECM (hADM) |
PDLLA microparticles + low-molecular-weight hyaluronic acid |
PN + hyaluronic acid + mannitol |
| Mechanism | AA material supply + peptide activation + hyaluronic acid support |
Amino acids → stimulate collagen + elastin |
PN → activates fibroblast DNA |
Directly replenishes ECM components |
PDLLA → foreign-body reaction → collagen production |
PN activation + hyaluronic acid replenishment + antioxidant |
| Hydration / hyaluronic acid | ◎ 80 mg non-cross-linked hyaluronic acid |
○ | ○ | ✕ | △ | ○ |
| Collagen induction | ◎ Material supply + activation |
○ | ◎ | ◎ Direct replenishment |
◎ PDLLA induction |
○ |
| Lifting | ◎ Ligament strengthening |
△ | ✕ | ○ | △ | △ |
| Downtime | ◎ Makeup OK the same day |
◎ | ○ | ○ | △ Small bumps occur |
○ |
| How long results last | 6 to 9 months | 4–6 months | 4–6 months | 6–12 months | 4–6 months | 6–12 months |
| Recommended sessions | 3 to 4 sessions (4-week intervals) |
3–5 sessions (2–3 weeks apart) |
3–5 sessions (2–4 weeks apart) |
1–3 sessions (3–4 weeks apart) |
3 to 4 sessions (4- to 8-week intervals) |
3–4 sessions (3–4 weeks apart) |
FlowThe treatment process
From your first consultation to aftercare,
we support you carefully.
-
01
- Free consultation
-
We examine your skin and determine whether Jalupro Super Hydro is the best choice. We suggest the amount, injection areas, number of sessions, and combinations with other treatments.
-
02
- Doctor’s examination
-
The doctor examines your skin type and condition and gives final confirmation of suitability for Jalupro, injection areas, and amount. Expected results, risks, and combinations with other treatments are also explained.
-
03
- Cleansing and numbing cream (optional)
-
Before treatment, after cleansing, numbing cream (topical anesthesia) is applied. *Anesthesia is optional.
-
04
- Jalupro Super Hydro injection
-
Jalupro Super Hydro is injected. For the whole face, it takes about 20 to 30 minutes.
-
05
- Aftercare and heading home
-
We explain the aftercare instructions (makeup OK on the day; no alcohol or sauna, etc.). If anything concerns you, feel free to contact us on our official LINE at any time.
PricePrices
All prices include tax
FACE Jalupro Super Hydro
OPTIONOptions
RiskDowntime, Risks, and Precautions
Jalupro Super Hydro is a product with the European CE mark,
but as with all injectable treatments, there are risks.
-
Downtime
- Downtime and recovery
-
- Right after treatment: injection marks and small bumps (fade within a few hours to the next day)
- Day 0 to 1: mild redness and a warm, flushed feeling
- In case of bruising: It will subside naturally within 1 to 2 weeks.
- Face washing: OK from the same day
- Makeup: OK from the same day
- Exercise, alcohol, and sauna: avoid on the day of treatment (24 hours)
-
Side Effects
- Side effects and risks
-
- Redness, swelling, and bruising (incidence 10 to 30%; fade within a few days)
- Injection marks (fade within 1 to 3 days)
- Temporary itching or warmth (fades within a few days)
- Firm lumps (temporary; often fade naturally)
- Allergic reactions (rare)
- Infection (rare; prevented with proper disinfection)
-
Contraindications
- Who cannot have this treatment
-
- Those who are pregnant or breastfeeding
- Those who may be pregnant
- Those with an active infection in the treatment area
- Those with a bleeding disorder
- Those with an autoimmune disease
- Those prone to keloids (please consult us)
- Those taking anticoagulants or supplements (please consult us)
-
Aftercare
- Aftercare precautions
-
- Be thorough with UV protection for 1 week after treatment
- Avoid harsh skincare (such as peels) for 1 week
- No strenuous exercise, hot stone baths, or sauna on the day of treatment
- Noticeable results begin to appear 2 to 4 weeks after treatment
- Please contact us right away if you notice anything unusual
DoctorOur Doctors
DirectorDr. Tsubasa Hayami, Clinic Director
A cosmetic surgeon who provides refined facial contouring based on careful design and medical evidence. Drawing on proven technical skill and evidence-based knowledge, he recommends the best, least burdensome treatment for each patient’s bone structure, expressions, and lifestyle.
— Specialties: facial liposuction / slim-face design / facial contouring / injectables / upper arm and leg liposuction
- Graduated from Kanazawa Medical University
- Department of Ophthalmology, Juntendo University
- Director, Tennoji branch of a major cosmetic surgery clinic
- Wing clinic Toyonaka opens
- Botox Vista / Juvéderm Vista certified doctor
- Alma Tune Lifting certified physician
- Onda Lift Kansai training physician / Oligio Kiss certified physician
- Facial liposuction: 1,000+ cases (Apr 2023 – Oct 2026)
VideoLearn more on video
In this video, Dr. Hayami, our clinic director, compares and explains next-generation skin-booster injections, including Jalupro.
He also covers how the injections differ, how to choose, and what the treatment involves.
[4 Skin-Booster Injections] Skin-quality treatments our doctor truly recommends
Is Rejuran already outdated? Dr. Hayami, our clinic director, takes an in-depth look at skin-booster injections, including Jalupro, comparing their effects, features, and how to choose between them. Find the skin-improvement and rejuvenation treatment that suits you.
FAQFAQ
Here are answers to questions we often get from patients about Jalupro Super Hydro treatment.
QWhat kind of treatment is Jalupro Super Hydro?
Jalupro Super Hydro is a next-generation skin-booster injection developed by Professional Derma SA of Switzerland. It contains 80 mg of non-cross-linked hyaluronic acid (high molecular weight 2000 kDa + low molecular weight 200 kDa), 7 amino acids (glycine, proline, lysine, leucine, alanine, valine, and arginine), and 3 peptides. The amino acids directly supply fibroblasts with the building materials for collagen and elastin synthesis, and the peptides send activation signals. The high-molecular-weight hyaluronic acid physically supports ligaments that have loosened with age, lifting the jawline. It is a highly safe product with the European CE mark Class III.
QHow are Jalupro and Sunekos different?
Jalupro is made by Professional Derma SA of Switzerland and Sunekos by Professional Dietetics of Italy, so their manufacturers differ, but both are leading amino-acid-based skin-booster injections. Sunekos Performa has 6 amino acids + low-molecular-weight hyaluronic acid and excels in delicate areas such as around the eyes and the neck. Jalupro Super Hydro contains more ingredients, with 7 amino acids + 3 peptides + 80 mg of high-molecular-weight hyaluronic acid, and stands out for lifting through ligament strengthening and deep hydration. Jalupro tends to suit those seeking improvement of jawline sagging and deep hydration, and Sunekos those aiming for delicate care around the eyes and neck. Many people also alternate between the two for a synergistic effect.
QWhen will I feel the effects of Jalupro Super Hydro?
Many people feel the hydration from the high-molecular-weight hyaluronic acid from the day after treatment. The collagen-promoting and lifting effects of the amino acids and peptides appear over 2 to 4 weeks. Changes become clear from the 2nd or 3rd session of the recommended course (3 to 4 sessions at 4-week intervals), and results peak 1 to 2 months after completing the course. Many people tell us their skin felt plumper and bouncier from the very next day.
QHow long is the downtime for Jalupro Super Hydro?
Right after treatment, injection marks and mild small bumps (like mosquito bites) appear, but most become unnoticeable within a few hours to the next day. Makeup is OK from the same day. In the rare case of bruising, it fades naturally within 1 to 2 weeks. Its downtime is among the lowest of skin boosters in its class, and almost everyone returns to normal daily life from the day after treatment.
QHow many sessions until I see results?
Many people feel a change in hydration from the day after even one session. The collagen-building effect of the amino acids and peptides becomes clear after 2 to 3 sessions. We recommend a course of 3 to 4 sessions at 4-week intervals. After the course, maintenance treatments every 3 to 6 months keep the results. For those who want a dramatic change from the first session, we may suggest combining it with the fast-acting Re2O.
QWhat are the side effects and risks of Jalupro Super Hydro?
The main side effects are redness, swelling, injection marks, and bruising (incidence 10 to 30%; they fade naturally within a few days to 2 weeks). Temporary warmth, itching, or firm lumps may occur. Because it is non-cross-linked hyaluronic acid, excessive puffiness or a foreign feel is unlikely, and allergic reactions are rare. Although the product has the European CE mark Class III, no injectable treatment can guarantee zero side effects. Please check the details at your consultation.
QIs there anyone who cannot receive Jalupro Super Hydro?
This treatment is not available to those who are pregnant, breastfeeding, or may be pregnant, those with an active infection in the treatment area, or those with a bleeding disorder or autoimmune disease. Those taking anticoagulants or certain supplements (such as omega-3 or vitamin E) may need to stop them 1 week before treatment. If you are prone to keloids, please consult us before treatment.
Contact us Booking & Inquiries
You can also book or ask questions via LINE!
Access
View on a larger map4F Toyonaka Ekimae Yasuda Building, 1-2-35 Honmachi, Toyonaka, Osaka
- 1 minute walk from Hankyu Toyonaka Station / 11 minutes by train from Umeda Station
- 15 minutes from Itami Airport / 15 minutes from Shin-Osaka Station
Hours
10:00–20:00 (last entry 19:00)
Closed: irregular *For more information, please contact us.
Departments: Cosmetic Dermatology, Cosmetic Surgery, Internal Medicine, Dermatology